The post SSC JE Previous Question Paper 2018 Shift 12 (Civil Engineering) appeared first on NewtonDesk.

]]>

**Q1:-** Which of the following is calcareous raw material used in the cement production?

**Options:
**

**Q2:-** If the size of specimen used to test the compressive strength of concrete is decreased, then the compressive strength of concrete will______.

**Options:
**

**Q3 –** What is the bottom diameter (mm) of the standard mould used in slump test of the concrete?

**Options:
**

**Q4:-** The showing up of white ﬂuffy layers on the surfaces of concrete is termed as______.

**Options:
**

**Q5:-** Tempering is the process used in the manufacturing of______.

**Options:
**

**Q6:-** Which of the following is burnt in the Hoffman’s kiln during the process of manufacturing?

**Options:
**

**Q7:-** In which of the following case Bethel process is used?

**Options:
**

**Q8:-** For proper workability of concrete, the water-cement ratio varies from_______.

**Options:
**

**Q9:-** The viscous liquid obtained from the destructive distillation of organic material is known as______.

**Options:
**

**Q10:-** What is the approximate bitumen content (expressed in percentage) in the reﬁned asphalt?

**Options:
**

**Q11:-** Which of the following is correct statement for the cubical content methods?

**Options:
**

**Q12:-** How many bags of cement are required for 14 cubic meter of cement concrete work (1 : 2 : 4)?

**Options:
**

**Q13:-** The approximate quantity (kg) of bending and binding the reinforcement of mild steel per mason per day is______.

**Options:
**

**Q14:-** The knowledge of which items is necessary for the analysis of rates?

**Options:
**

**Q15:-** What is the unit of measurement of pointing?

**Options:
**

**Q16:-** What is the nominal size (cm) of the standard brick as per Indian Standards?

**Options:
**

**Q17:-** The objective of creating the sinking fund is to accumulate the sufﬁcient money to_____.

**Options:
**

**Q18:-** Calculate the total weight (kg) of the steel bar required for a slab of 3 m x 2 m, if the slab is reinforced with 16 mm diameter bars @ 250 mm c/c in longitudinal and transverse direction.

**Options:
**

**Q19:-** Which of the following person functions as an arbitrator in public work department?

**Options:
**

**Q20:-** Calculate the volume (cubic metre) of earth work in an embankment of length 15 m. The top width of the embankment is 5 m and depth is 3 m. The side slope is 1.5 : 1.

**Options:
**

**Q21:-** In geodetic surveying, sum of all the internal angles (degree) of a spherical triangle should be____.

**Options:
**

**Q22:-** A line of 5 m on the original map is shrunk to 4.6 m. Calculate the shrunk scale if the original scale of the map was 1 cm = 80 m.

**Options:
**

**Q23:-** Which of the following instrument is used for setting out right angles?

**Options:
**

**Q24:-** Determine the normal pull (kg) for a tape of 20 m long standardized at a pull of 30 kg. The cross section area of the tape is 0.5 square centimetres, weight of the tape per metre is 20 gm. Take modulus of the elasticity for tape material as 21,00,000 kg per square centimetre.

**Options:
**

**Q25:-** Which of the following expression is used for calculation of R.L of a point?

**Options:
**

**SSC Junior Engineer (JE) All Previous Papers (NewtonDesk.com)**

**Q26:-** Calculate the reduced bearing of a line if its whole circle bearing is 130 degree.

**Options:
**

**Q27:-** Fore bearing and back bearing of the lines of a traverse are as follows:

Line | AB | BC | CD | DE |

Fore bearing (degree) | 125 | 172 | 264 | 315 |

Back bearing (degree) | 304 | 351 | 83 | 136 |

**Options:
**

**Q28:-** Which of the following features is shown by the parallel contour lines?

**Options:
**

**Q29:-** Calculate the distance between the instrument and the staff if the staff readings are 1.56 m, 2.05 m and 2.56 m. The multiplying constant is 100 and additive constant is 10.

**Options:
**

**Q30:-** Calculate the length (m) of the longer chord of 250 m radius curve having deﬂection angle of 90 degree.

**Options:
**

**Q31:-** 10 m thick confined aquifer gives the steady state discharge of 0.03m^{3}/s through the well of 50 cm radius. Due to pumping, the height of water in the well is dropped from 15 m to 10 m and the radius of influence is obtained as 500 m. What is the coefficient of permeability (mm/s)?

**Options:
**

**Q32:-** Which of the following represents the range of plasticity index for silt?

**Options:
**

**Q33:-** The grain size (mm) of medium grained sand lies between_____.

**Options:
**

**Q34:-** During the ﬂow over length of 30 m, the head loss of 5 m is occurred during the seepage. What is the value of hydraulic gradient?

**Options:
**

**Q35:-** Which of the following is measured with the help of barometer?

**Options:
**

**Q36:-** If the gauge pressure and atmospheric pressure at a point are observed as 70 mm of mercury and 750 mm of mercury respectively. What is the value of the absolute pressure (mm of mercury) at that point?

**Options:
**

**Q37:-** The rise of mercury in barometer is indicated as 80 mm. What is the atmospheric pressure (kN/m^{2}) at that point?

**Options:
**

**Q38:-** Water is transported on a level road in the cylindrical container of diameter 0.5 m and height 0.8 m. The maximum acceleration of vehicle is 5m/s^{2}. What is the initial allowable height of water (cm) in the tank, if there is no spill?

**Options:
**

**Q39:-** For a flow, the velocity field and variation in density is given as, and **ρ= ρ _{o}e^{-3t}** respectively. What is the value of

**Q40:-** A circular pipe of diametre 0.5 m carries the discharge of 50 litres/s. The head loss due to friction in pipe is 0.15 m and friction factor for the pipe is given as 0.01. What is the length (m) of pipe?

**Options:
**

**Q41:-** A siphon is used at point A to draw the water from large reservoir and discharge it to the point B at an atmospheric pressure. If the elevation difference of points A and B is 10 m, what is the velocity (m/s) at point B?

**Options:
**

**Q42:-** If the two exactly same pumps are running at the same speed and lift the water at the head of 20 m and 30 m respectively. What is the diameter of impeller of second pump if the diameter (mm) of impeller of ﬁrst pump is 500 mm?

**Options:
**

**Q43:-** The Bulk modulus of a fluid is given by 25 GPa. What is the compressibility (Pa^{-1}) of that fluid?

**Options:
**

**Q44:-** Which of the following parameter is measured with the help of elbow meter?

**Options:
**

**Q45:-** Which one of the followings is not a cause of water-logging?

**Options:
**

**Q46:-** Calculate the velocity of ﬂow through a channel if the mean diameter of the soil particles is 0.5 mm and discharge is 60 cumces.

**Options:
**

**Q47:-** What is the value of the slope require for coning of the wheel?

**Options:
**

**Q48:-** Calculate the ratio of radius of the relative stiffness for concrete pavements if the ratio of their thickness is 1.5.

**Options:
**

**Q49:-** Which of the following represents the value of hourly variation factor?

**Options:
**

**Q50:-** What is the rainfall intensity (mm/hr) according to the formula given by British Ministry of Health, if the time of concentration is 540 seconds?

**Options:
**

**SSC Junior Engineer (JE) All Previous Papers (NewtonDesk.com)**

**Q51:-** Efﬁciency of a riveted joint us deﬁned as the ratio of

**Options:
**

**Q52:-** The critical load for a column of length l hinged at both ends and having ﬂexural rigidity EI, is given by

**Options:
**

**Q53:-** For determination of allowable stress in axial compression, Indian Standard Institution has adopted

**Options:
**

**Q54:-** When a large value of radius of gyration is not required

**Options:
**

**Q55:-** Perforated cover plates are particularly suitable for built up sections consisting of

**Options:
**

**Q56:-** In a grillage footing, the maximum shear force occurs at the

**Options:
**

**Q57:-** Lug angle is

**Options:
**

**Q58:-** With usual notations of the letters, the shear stress f_{s} at any point of the cross-section is given by

**Options:
**

**Q59:-** A simply supported beam carrying a central load, will be safe in deﬂection if the ratio of its span to depth is

**Options:
**

**Q60:-** Rise of a Jack arch is kept about

**Options:
**

**Q61:-** Separation of coarse aggregates from mortar during transportation is known

**Options:
**

**Q62:-** Pick up the correct statement from the following:

**Options:
**

**Q63:-** Water cement ratio is

**Options:
**

**Q64:-** Higher workability of a concrete is required if the structure is

**Options:
**

**Q65:-** Workability of concrete mix with low water cement ratio is determined by

**Options:
**

**Q66:-** For preparing a test specimen it is necessary

**Options:
**

**Q67:-** The maximum thickness of concrete floor of a cement warehouse is

**Options:
**

**Q68:-** The compaction of concrete improves

**Options:
**

**Q69:-** Horizontal construction joints in concrete walls are generally provided at

**Options:
**

**Q70:-** Workability of concrete for a given water content is good if the aggregates are

**Options:
**

**Q71:-** If a grading curve is horizontal between the portions of 20 mm I.S. Sieve and 4.75 mm I.S. sieve, the graded aggregates do not contain

**Options:
**

**Q72:-** Saw dust can be rendered chemically inert by boiling it in water containing

**Options:
**

**Q73:-** Pick up the correct statement from the following

**Options:
**

**Q74:-** For construction of structures in sea water, the cement generally preferred to is

**Options:
**

**Q75:-** The strength of concrete made with angular aggregate and rounded aggregate is practically same at the water/cement ratio is

**Options:
**

**SSC Junior Engineer (JE) All Previous Papers (NewtonDesk.com)**

**Q76:-** Pick up the correct statement from the following: Drying shrinkage is affected by

**Options:
**

**Q77:-** The compound constituent of cement abbreviated by C3A represents:

**Options:
**

**Q78:-** Deleterious substances in aggregate are undesirable because they may:

**Options:
**

**Q79:-** If the modular ratio is m, steel ratio is r and overall depth of a beam is d, the depth of the critical neutral axis of the beam is

**Options:
**

**Q80:-** According to the steel beam theory of doubly reinforced beams

**Options:
**

**Q81:-** If Sb is the average bond stress on a bar of diameter d subjected to maximum stress t, the length of the embedment l is given by

**Options:
**

**Q82:-** The stresses developed in concrete and steel in reinforced concrete beam 25 cm width and 70 cm effective depth are 62.5 kg/cm2and 250 kg/cm2respectively. If m= 15, the depth of its neutral axis is

**Options:
**

**Q83:-** A T-beam behaves as a rectangular beam of a width equal to its ﬂange if its neutral axis

**Options:
**

**Q84:-** If the maximum bending moment of a simply supported slab is M Kg.cm the effective depth of the slab is: (It is given that Q is M.R. factor)

**Options:
**

**Q85:-** The percentage of minimum reinforcement should of the gross sectional area in slabs is

**Options:
**

**Q86:-** In a combined footing if shear stress does not exceed 5 kg⁄cm2, the nominal stirrups provided are

**Options:
**

**Q87:-** On piles, the drop must be at least

**Options:
**

**Q88:-** Total pressure on the vertical face of a retaining wall of height h acts parallel to free surface and from the base at a distance of h

**Options:
**

**Q89:-** The ratio of the length and depth of a simply supported rectangular beam which experiences maximum bending stress equal to tensile stress due to same load at its mid span is

**Options:
**

**Q90:-** The maximum deﬂection of a simply supported beam of span L carrying an isolated load at the center of the span, ﬂexural rigidity being EI is

**Options:
**

**Q91:-** A steel plate d x b is sandwiched rigidly between two timber joists each D x B/2 in section. The moment of resistance of the beam for the same maximum permissible stress σ in timber and steel will be:

Where Young’s modulus of steel is m times that of the timber

**Options:
**

**Q92:-** The radius of gyration of a section of area A and least moment of inertia I about the centroidal axis is

**Options:
**

**Q93:-** In the truss shown below, the force in member BD is

**Options:
**

**Q94:-** The Force in AD of the truss shown in figure below is

**Options:
**

**Q95:-** If D and d are external and internal diameters of a circular shaft respectively, its polar moment of inertia is

**Options:
**

**Q96:-** Pick up the correct statement from the following

**Options:
**

**Q97:-** If Q is load factor, S is shape factor and F is factor of safety in elastic design, the following:

**Options:
**

**Q98:-** A two hinged parabolic arch of span l and rise h carries a load varying from zero at the left end to w per unit run at the right end. The horizontal thrust is

**Options:
**

**Q99:-** The maximum Bending Moment due to an isolated load in a three-hinged parabolic arch (span l, rise h) having one of its hinges at the crown, occurs on either side of the crown at a distance

**Options:
**

**Q100:-** The equivalent length of a column of length L having both the ends hinged is

**Options:
**

**SSC Junior Engineer All Previous Papers**

The post SSC JE Previous Question Paper 2018 Shift 12 (Civil Engineering) appeared first on NewtonDesk.

]]>The post SSC JE Previous Question Paper 2018 Shift 11 (Civil Engineering) appeared first on NewtonDesk.

]]>**Q1:-** Which one of the following treatment is used to make the timber ﬁre resistance?

**Options:
**

**Q2:-** The dynamic modulus of elasticity of sample of concrete is compared in______.

**Options:
**

**Q3:-** Efﬂorescence in bricks causes due to_______.

**Options:
**

**Q4:-** Which of the following compounds of Portland cement reacts immediately with the water and set early?

**Options:
**

**Q5:-** In the concrete mix with proportions of its ingredient 1:3:6, the actual quantity of sand per unit volume of cement, if bulking of the sand is 15% is______.

**Options:
**

**Q6:-** Which of the following is TRUE regarding stress-strain curve of concrete?

**Options:
**

**Q7:-** Which one of the following is used as a carrier in paint?

**Options:
**

**Q8:-** Which of the following tests are used for testing of tiles?

**1.** breaking strength test

**2.** impact test

**3.** transverse strength test

**4.** water absorption test

**Options:
**

**Q9:-** How many bricks are required for 1 cubic meter of brick masonry work?

**Options:
**

**Q10:-** Which of the following mineral is responsible for the red colour in bricks?

**Options:
**

**Q11:-** What is the unit of measurement for steel reinforcement?

**Options:
**

**Q12:-** What is the weight (in kg) per meter length for 12 mm diameter steel bar?

**Options:
**

**Q13:-** What percentage of the total cost is added in the cost of construction for contingencies?

**Options:
**

**Q14:-** What percentage of total cost is added to the schedule of rates of the public work department for over-head cost?

**Options:
**

**Q15:-** For estimation of painting area of corrugated sheets, percentage increase in area above the plain area is______.

**Options:
**

**Q16:-** Central line method for estimation is suitable for________.

**Options:
**

**Q17:-** Deduction at the L-junction of wall for total length of the central line is______.

**Options:
**

**Q18:-** Calculate the quantity of the cement required in cubic meter for 10 square meters of cement plaster 12 mm thick using cement mortar of 1:6.

**Options:
**

**Q19:-** Calculate the quantity of the earthworks in cubic meter for a canal embankment of 100 m long having heights of 3 m and 5 m at the two extreme edges. Top widths of the embankment are 2 m and 4 m at the two extreme edges and side slope is 2: 1. Use trapezoidal method.

**Options:
**

**Q20:-** Calculate the primary estimate including contractor’s proﬁt in rupees for the building having a plinth area of 1,500 square meters and a rate of Rs. 2,000 per square meter.

**Options:
**

**Q21:-** 10 divisions of vernier scale are equal to 11 divisions of a main scale of each 0.1 mm. What is the least count of the vernier scale?

**Options:
**

**Q22:-** Which one of the following statements includes the principle of surveying?

**Options:
**

**Q23:-** Number of links in 20 m metric chain is______.

**Options:
**

**Q24:-** The hypotenuse allowance (in m) for 30 m long chain, if the slope is 1:10 is______.

**Options:
**

**Q25:-** What is the declination if magnetic meridian is towards the western side of the true meridian?

**Options:
**

**SSC Junior Engineer (JE) All Previous Papers (NewtonDesk.com)**

**Q26:-** Correction of length due to reduction to mean sea level is_______.

**Options:
**

**Q27:-** How much refraction correction (in m) is required for a distance of 500 m?

**Options:
**

**Q28:-** What is the purpose of conducting the resection method in the plan table surveying?

**Options:
**

**Q29:-** What is the degree of the curve (in degree) for a radius of 573 m using chain of 20 m length?

**Options:
**

**Q30:-** Which method of contouring is most suitable for hilly terrains?

**Options:
**

**Q31:-** The pore water pressure in the soil sample of consolidometer test is______.

**Options:
**

**Q32:-** The clay deposit of thickness 10 cm and void ratio 0.5 undergoes settlement and now it’s ﬁnal void ratio is 0.2. The thickness (cm) of the settlement layer is______.

**Options:
**

**Q33:-** Which of the following represent the percentage limit of porosity of the compacted sand?

**Options:
**

**Q34:-** In the falling head permeability test, in the duration of 3 hours the initial head of 1000 mm is dropped to 350 mm. The diameter of the stand pipe is 0.5 cm. The length and diameter of the soil specimen are 20 cm and 10 cm respectively. What is the coefﬁcient of permeability (mm/s) of the soil?

**Options:
**

**Q35:-** Which of the following is CORRECT to maximize the efﬁciency of all reaction turbines?

**Options:
**

**Q36:-** A 1.2 m wide rectangular channel of bed slop 0.0004 and manning’s coefficient 0.01, carrying the discharge of 0.5m^{3}/s. The normal depth of the channel is _______.

**Options:
**

**Q37:-** Which of the following statement is **CORRECT**?

**Options:
**

**Q38:-** Draft tube at the exit of a reaction turbine used for hydroelectric project is_____.

**Options:
**

**Q39:-** What is the depth of the center of pressure for the rectangular lamina which is vertically inside the water of height h?

**Options:
**

**Q40:-** In the hydel system, a forebay is used at the junction of______.

**Options:
**

**Q41:-** The motion of outgoing water from the hole made at midpoint of completely ﬁlled open cylindrical tank with water is______.

**Options:
**

**Q42:-** Which one is **CORRECT** about streamlined body?

**Options:
**

**Q43:-** What is the speciﬁc speed of a centrifugal pump, which has a rated capacity of 44 cumec and a head of 36 m when operated at the speed of 725 rpm?

**Options:
**

**Q44:-** On which of the following principle Bernoulli’s equation is based?

**Options:
**

**Q45:-** In an irrigated ﬁeld, the net irrigation requirement is 15 cm, the application efﬁciency is 80% and water conveyance efﬁciency is 60%. What is the gross irrigation requirement (in cm)?

**Options:
**

**Q46:-** Available moisture is the difference in water content of soil between ﬁeld capacity and________.

**Options:
**

**Q47:-** Right of way is the summation of the width of_______.

**Options:
**

**Q48:-** Gradient on a highway is 1 in 20. Radius of the curve is 200 m. After grade compensation the grade to be provided should not be less than 4%. Calculate the grade compensation.

**Options:
**

**Q49:-** Which one of the following is most important parameter for the removal of discrete particles in design of continuous ﬂow rectangular sedimentation tank?

**Options:
**

**Q50:-** The most efﬁcient method to conserve energy in the form of oil and gases is_______.

**Options:
**

**SSC Junior Engineer (JE) All Previous Papers (NewtonDesk.com)**

**Q51:-** Dead load comprises of:-

**Options:
**

**Q52:-** Which of the following statements is true?

**1.** Impact loads are equal to the sum of the magnitude of the loads actually caused and the magnitude of the loads had they been dead loads.

**2.** Impact loads are equal to the difference between the above mentioned entities.

**Options:
**

**Q53:-** What will be the value of reduction factor R1 if value of At is given to be 500ft^{2}?

**Options:
**

**Q54:-** If we use a link support in a structural system, then how many unknowns would we have?

**Options:
**

**Q55:-** Which of the following statements is true?

**1.** For instability, at least one joint of the structure should be able to displace without causing change in length of all the members.

**2. **For instability, at least one joint of the structure should be able to displace without causing change in length of at least one of the members.

**Options:
**

**Q56:-** If all the reactions acting on a planar system are concurrent in nature, then the system is:-

**Options:
**

**Q57:-** In the following questions, j represent no. of joints and r represents no. of external forces. If a structure has 2j – r no. of members, then it will be:-

**Options:
**

**Q58:-** What is the function of portal in bridge trusses?

**Options:
**

**Q59:-** Which of the following statements is true?

**1.** Simple trusses consist entirely of triangle.

**2.** It can consists of any other shaped intermediate parts, as long as it is stable.

**Options:
**

**Q60:-** Given that J is no. of joints. B and R are no. of members and no. of reactions. If B = 5, R = 3 and J = 4, then the truss is:-

**Options:
**

**Q61:-** Which of the following is most common alternative to cement in concrete?

**Options:
**

**Q62:-** is added to make white concrete.

**Options:
**

**Q63:-** Which process comes after batching in manufacture process of concrete?

**Options:
**

**Q64:-** In small works, concrete is transported using:

**Options:
**

**Q65:-** Steam curing of concrete is adopted for:

**Options:
**

**Q66:-** How does the strength of concrete differ with age of concrete?

**Options:
**

**Q67:-** Bleeding is good to an extent if it occurs when concrete is:

**Options:
**

**Q68:-** The figure given below represents a:

**Options:
**

**Q69:-** The size of commonly used specimen for compression test of concrete is:

**Options:
**

**Q70:-** is used to ensure that the thickness of plastering is uniform.

**Options:
**

**Q71:-** are used to press mortar and spread it uniformly.

**Options:
**

**Q72:-** The ratio of the allowable bond stress in deformed bars to that of plain bars is about:-

**Options:
**

**Q73:-** For which of the following grades ordinary concrete is not used?

**Options:
**

**Q74:-** The ratio of various ingredients (cement, sand, aggregates) in concrete of grade M 200 is: A. 1:2:4

**1.** 1:3:6

**2.** 1: 1.5: 3

**3. **1:1:2

**Options:
**

**Q75:-** What do we need to do while designing an air entrained concrete?

**Options:
**

**SSC Junior Engineer (JE) All Previous Papers (NewtonDesk.com)**

**Q76:-** If the effective plan area of a warehouse is 54 sq. m, and maximum height of piles permitted is 270 cm, then what is the number of cement bags that can be stored?

**Options:
**

**Q77:-** Which of the following is the results of proper batching of concrete?

**A.** Economy

**B.** Durability

**C.** Workability

**D.** Strength

**Options:
**

**Q78:-** The process of mixing, transporting, placing and compacting concrete using Ordinary Portland cement should not take more than how much time?

**Options:
**

**Q79:-** PSC stands for:

**Options:
**

**Q80:-** Which of the below structure doesn’t require Pre Stressed Concrete?

**Options:
**

**Q81:-** Which of the following is the minimum thickness of a ﬂat slab that is taken into consideration?

**Options:
**

**Q82:-** If W is the load on a circular slab of radius R, the maximum circumferential moment at the center of the slab is

**A)** WR^{2} / 16

**B)** 2WR^{2} / 16

**C)** 3WR^{2} / 16

**Options:
**

**Q83:-** The ratio of the breadth to effective depth of a beam is kept

**Options:
**

**Q84:-** A ribbed slab is provided for which of the following?

**Options:
**

**Q85:-** The thickness of the ﬂange of a Tee beam of a ribbed slab is assumed as

**Options:
**

**Q86:-** Which of the following statements is true?

**Options:
**

**Q87:-** According to I.S. 456-1978, the thickness of reinforced concrete footing on piles at its edges is kept less than

**Options:
**

**Q88:-** If **q** is the punching shear resistance per unit area **a**, is the side of a square footing for a column of side **b**, carrying a weight W including the weight of the footing, the depth (D) of the footing from punching shear consideration is

**A)** D = W(a-b) / 4a^{2}bq

**B)** D = W(a^{2}-b^{2}) / 4a^{2}bq

**C)** D = W(a^{2}-b^{2}) / 8a^{2}bq

**D)** D = W(a^{2}-b^{2}) / 4abq

**Options:
**

**Q89:-** The tangential component of stress on an plane inclined θ^{o} to the direction of the force, may be obtained by multiplying the normal stress by______.

**A)** Sin θ

**B)** Cos θ

**C)** tan θ

**D)** Sin^{2}θ

**Options:
**

**Q90:-** Shear strain energy theory for the failure of a material at elastic limit is due to

**Options:
**

**Q91:-** Pick up the indeterminate structure from those shown in the figure given below.

**Options:
**

**Q92:-** Beams composed of more than one material, rigidly connected together so as to behave as one piece, are known as

**Options:
**

**Q93:-** Poisson’s ratio is μ deﬁned as the ratio of

**Options:
**

**Q94:-** Among the following identify the dimensionless quantity.

**Options:
**

**Q95:-** Identify the correct statement.

**Options:
**

**Q96:-** For an isotropic, homogeneous and elastic material obeying Hook’s law, number of independent elastic constants is

**Options:
**

**Q97:-** The angle between the principle plane and the plane of maximum shear is

**Options:
**

**Q98:-** The state of pure shear stress is produced by

**Options:
**

**Q99:-** When the length of a tension member is too long

**Options:
**

**Q100:-** The allowable stress in axial tension is generally kept less if thickness of the member is more than

**Options:
**

**SSC Junior Engineer All Previous Papers**

The post SSC JE Previous Question Paper 2018 Shift 11 (Civil Engineering) appeared first on NewtonDesk.

]]>The post SSC JE Previous Question Paper 2018 Shift 10 (Civil Engineering) appeared first on NewtonDesk.

]]>**Q1:-** The crushing strength (MPa) of good stone used for construction of a building must not be less than_____.

**Options:
**

**Q2:-** In ordinary cement, about 99% of its ﬁnal strength is achieved in_____.

**Options:
**

**Q3:-** In the process of the hydration of OPC, what is the water requirement (expressed as the percentage by weight of cement) to complete the chemical reactions?

**Options:
**

**Q4:-** What is the main reason to use lime in the cement slurry during the plastering in the top coat?

**Options:
**

**Q5:-** Bulking of sand occurs in the moisture content of_______.

**Options:
**

**Q6:-** Which of the following is the main advantage of the plywood?

**Options:
**

**Q7:-** The hardwood is produced by which of the following trees?

**Options:
**

**Q8:-** Which one of the following metamorphic rocks has more weathering resistance characteristics?

**Options:
**

**Q9:-** Which of the following type of stone is used in the rubble masonry?

**Options:
**

**Q10:-** The hydraulicity of the hydraulic lime is mainly due to______.

**Options:
**

**Q11:-** What percentage of the cost of the estimate is provided for the work charged establishment?

**Options:
**

**Q12:-** What is the thickness (inches) of the one brick wall made up of traditional brick?

**Options:
**

**Q13:-** Which one is the CORRECT option for the damp proof course?

**Options:
**

**Q14:-** Calculate the year’s purchase for a property of useful life of 30 years and rate of interest of 5% per annum.

**Options:
**

**Q15:-** What is the density of the mild steel in quintal per cubic meter?

**Options:
**

**Q16:-** Cleaning and ﬁxing of glass panel is measured in______.

**Options:
**

**Q17:-** Calculate the volume (cubic meter) of earthwork for an embankment of length 30 m and width 4 m. The mean depth of the embankment is 4 m and side slope is 2 : 1. Using mid-sectional area method.

**Options:
**

**Q18:-** Calculate the quantity (cubic meter) of the cement required for 1 cubic meter of brick work with cement mortar (1 : 4).

**Options:
**

**Q19:-** Which one is the CORRECT statement for conversion of the lift into lead?

**Options:
**

**Q20:-** A building has been purchased by a person at a cost of Rs. 25,000. The useful life of the building is 40 years and the scrap value of the building is Rs. 3,000. Calculate the annual sinking fund (Rs.) at the rate of 5% interest.

**Options:
**

**Q21:-** Plumb bob lines at two different places in geodetic surveying will_____.

**Options:
**

**Q22:-** Calculate the true reduced level (m) of a point A after correcting the refraction and curvature. The staff reading at the point taken from an instrument set at a distance of 2 km from the point A is 2.56 m. The staff reading from the same station on a bench mark of reduced level is 100 m is 1.34 m.

**Options:
**

**Q23:-** Which one is the CORRECT expression for the horizontal distance between the instrument and the staff for the anallactic telescope, if S is the staff intercept, K and C are multiplying and additive constant

**Options:
**

**Q24:-** With an increase in the denominator of the representative fraction, the scale of the map will_____.

**Options:
**

**Q25:-** Calculate the length of one division of the vernier scale, if least count of the combination of main and vernier scale is 0.02 mm. The least count of the main scale is 1 mm.

**Options:
**

**SSC Junior Engineer (JE) All Previous Papers (NewtonDesk.com)**

**Q26:-** Which one is the CORRECT statement?

**Options:
**

**Q27:-** Which of the following statement is CORRECT for whole circle bearing?

**Options:
**

**Q28:-** Calculate the length (m) tangent of a 5 degree curve, if the deﬂection angle is 60 degree

**Options:
**

**Q29:-** Calculate the limiting length (m) of the offset, if the maximum allowable error in laying offset is 2 degree. The scale of the map is 1 cm = 100 m.

**Options:
**

**Q30:-** Calculate the error in the staff reading on a staff at a distance of 100 m due to out of the center of the bubble by 4 divisions. The sensitivity of the bubble tube is 30 seconds per 2 mm divisions

**Options:
**

**Q31:-** For which of the following soil, plasticity index is maximum?

**Options:
**

**Q32:-** A friction pile of diameter 50 cm is embedded 15 m into the homogeneous consolidated clay deposit. If the adhesion factor is 0.7 and adhesion develops between the clay and pile shaft is 4 t/m^{2}. What is the safe load (t) for factor of safety 3.0?

**Options:
**

**Q33:-** If the void ratio and discharge velocity for soil is 0.5 and 6×10^{-7} m/s respectively, what is the value of seepage velocity (m/s)?

**Options:
**

**Q34:-** For bulk heads, which of the following earth pressure theory is applied directly?

**Options:
**

**Q35:-** On increasing the temperature of a liquid, the viscosity of the liquid____.

**Options:
**

**Q36:-** Which of the following represents the unit of kinematic viscosity?

**Options:
**

**Q37:-** What is the discharge (m^{3}/s) from circular pipe having diameter 0.5 m and velocity of flow of 10 m/s?

**Options:
**

**Q38:** A rectangular channel of cross-sectional dimensions 15×9 m is running at one third. What is the hydraulic radius (m) of the channel?

**Options:
**

**Q39:-** A turbine generates the power of 150,000 kW while working at the speed of 300 rpm at the head of 100 m. What is the speciﬁc speed of the turbine?

**Options:
**

**Q40:-** Which of the following represent the Darcy’s friction factor in terms of Reynolds number (Re) for the laminar ﬂow in circular pipes?

**Options:
**

**Q41:-** Which of the following represents the maximum thickness of the boundary layer in the pipe having radius R?

**Options:
**

**Q42:-** Which of the following represents the speed of the elementary wave in the still water at a depth of y?

**Options:
**

**Q43:-** What is the speciﬁc energy (m-kg/kg) for 1 m depth of ﬂow having velocity of 3 m/s?

**Options:
**

**Q44:-** In the Sutro weir, the discharge of the weir is proportional to_______.

**Options:
**

**Q45:-** Watering done prior to the sawing of the crops is called_______.

**Options:
**

**Q46:-** Calculate the runoff (cm) from a rainfall of 3 hours. The intensity of the rainfall is 2 cm/hr. The evaporation and inﬁltration losses are 8 mm and 16 mm respectively.

**Options:
**

**Q47:-** Calculate the design rate of super elevation (%) on a highway in a plain terrain, if design speed of the highway is 80 kmph and radius of the curve is 400m.

**Options:
**

**Q48:-** The width (m) of the narrow gauge is____.

**Options:
**

**Q49:-** On which scale the turbidity is measured?

**Options:
**

**Q50:** Which of the following represents the approximate overflow rate (liters/hours/m^{2}) for the plain sedimentation tank?

**Options:
**

**SSC Junior Engineer (JE) All Previous Papers (NewtonDesk.com)**

**Q51:-** Which of the following structural loads are not applied commonly to a building?

**Options:
**

**Q52:-** In the method used to establish the magnitude of live load, what is the reference time period?

**Options:
**

**Q53:-** Find the value of reduction factor R2 if F (rise to span ratio in inches) is given to be 5.

**Options:
**

**Q54:-** How many constraints are there in a free-rotation support used in a planar system?

**Options:
**

**Q55:-** A surface structure has:-

**Options:
**

**Q56:-** If in a planar system, only 2 reaction forces are acting, then the system is:-

**Options:
**

**Q57:-** If a structure has total 10 joints, then what should be the minimum no. of joints in which equilibrium equations should be concurrently satisﬁed for stability?

**Options:
**

**Q58:-** A single angle in tension is connected by one leg only. If the areas of connecting and outstanding legs are respectively **a** and **b**, then what is the net effective area of the angle?

**A)** a – [b/(1+0.35 b/a)]
**B)** a + [b/(1+0.35 b/a)]
**C)** a – [b/1+0.2 b/a)]
**D)** a + [b/1+0.2 b/a)]
**Options:
**

**Q59:-** Generally, in a truss system compressive parts are thicker than tensile parts. Is it true or false?

**Options:
**

**Q60:-** If a truss has two more members surpassing each other, then it is:-

**Options:
**

**Q61:-** How many components are mainly used to prepare concrete?

**Options:
**

**Q62:-** Retarders are used for:

**Options:
**

**Q63:-** What is the ratio of components in grade M20 concrete?

**A)** 1:3:6

**B)** 1:1.5:3

**C)** 1:1:2

**D)** 1:2:4

**Options:
**

**Q64:-** How many types of machine mixers of concrete are available?

**Options:
**

**Q65:-** Excess vibration during compacting of concrete can lead to:

**Options:
**

**Q66:-** Which of the below property of aggregates is not desirable?

**Options:
**

**Q67:-** Which of the following statements is true?

**A)** Workability reduces with time.

**B)** Workability does not reduce with time.

**C)** Workability remains constant with time.

**Options:
**

**Q68:-** Modulus of elasticity of concrete, E is calculated using:

**A)** E=5000√fck

**B)** E=500√fck

**C)** E=50√fck

**D)** E=5√fck

**Options:
**

**Q69:-** The result of Vee-Bee test is expressed in terms of:

**Options:
**

**Q70:-** Plastering is also called:

**1)** Pre-casting

**2)** Pargeting

**3)** Porting

**4)** Polishing

**Answer:** Pargeting

**Q71:-** In plastering, the 1^{st} coat is called ___________and its thickness should be ______mm.

**Options:
**

**Q72:-** Which of the following statements is true?

**A)** Mud plastering does not require curing

**B)** Mud plastering requires curing.

**C)** It depends on the situation

**Options:
**

**Q73:-** Which of the following statements is true?

**Options:
**

**Q74:-** In the method of voids for determination of the quantity of cement paste, it is assumed that

**Options:
**

**Q75:-** The 28 days’ cube strength of mass concrete using aggregates of maximum size 5 cm for gravity dams should be:

**Options:
**

**SSC Junior Engineer (JE) All Previous Papers (NewtonDesk.com)**

**Q76:-** What do you mean by ‘Ware house pack’ of cement?

**Options:
**

**Q77:-** Which of the following refers to the process of proper and accurate measurement of concrete ingredients for uniformity of proportion?

**Options:
**

**Q78:-** What are the dimensions of a 35-liter forma for measuring aggregates by volume?

**Options:
**

**Q79:-** In how many types can R.C.C. be classiﬁed into?

**Options:
**

**Q80:-** R.C.C. was developed and ﬁrst used by:

**Options:
**

**Q81:-** Which of the below is not a property of ferro cement?

**Options:
**

**Q82:-** If W is the load on a circular slab of radius R, the maximum radial moment at the center of the slab is

**A)** WR^{2}/16

**B)** 2WR^{2}/16

**C)** 3WR^{2}/16

**D)** 5WR^{2}/16

**Options:
**

**Q83:-** If the ratio of the span to the overall depth does not exceed 10, the stiffness of the beam will ordinarily be satisfactory in case of a

**Options:
**

**Q84:-** The total load on the lintel shown in the figure below will be taken as the weight of brickwork contained in ______.

**Options:
**

**Q85:-** The maximum permissible size of aggregates to be used in casting the ribs of a slab is

**Options:
**

**Q86:-** For a number of columns constructed in a row, the type of foundation provided is

**Options:
**

**Q87:-** If the bearing capacity of soil is 10 tones/cm^{2} and the projection of plain concrete footing from walls, is **a** cm, the depth D of footing is

**A)** D = 0.0775a

**B)** D = 0.775a

**C)** D = 0.775√a

**D)** D = 0.775a^{2
}**Options:
**

**Q88:-** If p is the net upward pressure on a square footing of side b for a square column of side **a**, the minimum bending moment is given by

**A)**M.= pb(c-a) / 4

**B)**M. = pb(b-a)^{2} / 4

**C)**M. = pb(b-a)^{2} / B

**D)**M. = pb(b+a) / 8

**Options:
**

**Q89:-** A road of uniform cross-section A and length L is deformed by ẟ, when subjected to a normal force P. The Young’s modulus E of the material is

**A)** E = P. ẟ / A.L

**B)** E = A. ẟ / P.L

**C)** E = P.L / A. ẟ

**D)** E = P.A / L. ẟ

**Options:
**

**Q90:-** Total strain energy theory for the failure of a material at elastic limit is known as

**Options:
**

**Q91:-** By applying the static equations i.e. ΣH = 0, ΣV = 0 and ΣM = 0, to a determinate structure, we may determine

**Options:
**

**Q92:-** The ratio of the section modulus of a square section of side B and that of a circular section of diameter D is

**A)** 2π/15

**B)** 3π/16

**C)** 3π/8

**D)** π/16

**Options:
**

**Q93:-** Which of the following statements is true?

**Options:
**

**Q94:-** The one that has least carbon content is:

**Options:
**

**Q95:-** The modulus of elasticity of steel is more than that of concrete. It indicates that steel is

**Options:
**

**Q96:-** Which of the following statements is true?

**Options:
**

**Q97:-** In a thin cylindrical shell, the ratio of longitudinal stress to hoop stress is

**Options:
**

**Q98:-** Which of the following statements is true?

**Options:
**

**Q99:-** The net area of round bars to resist the tension, is the area of cross section at

**Options:
**

**Q100:-** Pick up the correct statement from the following:

**Options:
**

Answer: All option are correct

**SSC Junior Engineer All Previous Papers**

The post SSC JE Previous Question Paper 2018 Shift 10 (Civil Engineering) appeared first on NewtonDesk.

]]>The post SSC JE Previous Question Paper 2018 Shift 9 (Civil Engineering) appeared first on NewtonDesk.

]]>**Q1:-** Which of the following statement is CORRECT about the rocks and minerals?

**Options:
**

**Q2:-** Which of the following possess more ability to resist ﬁre?

**Options:
**

**Q3:-** The strength of any timber is highest in direction of_____.

**Options:
**

**Q4:-** Which of the following represents the moisture content in the properly-seasoned timber?

**Options:
**

**Q5:-** In the air drying process, the practical limit of moisture content is______.

**Options:
**

**Q6:-** Which of the following represents the average life (years) of the high durable timber?

**Options:
**

**Q7:-** Which of the following is the most important characteristic of the alumina in the brick earth?

**Options:
**

**Q8:-** The target mean strength of the M20 grade concrete is 27 N/mm^{2}. What is the value of standard deviation?

**Options:
**

**Q9:-** Which of the following property of ordinary Portland cement is improved by the pozzolana?

**Options:
**

**Q10:-** Which of the following represents the normal consistency of ordinary Portland cement?

**Options:
**

**Q11:-** What percentage of the cost of the estimate is provided for the tools and plants?

**Options:
**

**Q12 –** What is the thickness (cm) of a two brick wall made up of standard modular brick?

**Options:
**

**Q13 –** The expected out turn (cubic metre) of reinforced brickwork per mason per day is_____.

**Options:
**

**Q14:-** A canal bank has a length of 100 m and its height at two extreme ends is 2 m and 3 m respectively. The side slope of the bank is 2 : 1. The rate of pitching is Rs. 500 per square metres. Calculate the cost (Rs.) of pitching of the area of the side slope.

**Options:
**

**Q15:-** Calculate the volume (cubic metre) of the dry mortar required for 1 cubic metre brick work.

**Options:
**1) 0.18

2) 0.23

3) 0.3

4) 0.45

**Q16:-** Which of the following is a factor for obsolescence of the property?

**Options:
**

**Q17:-** Calculate the years purchase for a property of useful life of 30 years and rate of interest of 5% per annum. The rate of interest for sinking fund is 3%.

**Options:
**

**Q18:-** The expression for the total volume of earthwork for an embankment using Simpson’s one third rule, if A_{1}, A_{2}, A_{3}, A_{4},…., A_{n-1} and A_{n} are the areas at n sections at an interval of h is______.

**Options:-
**

**Q19 –** Which of the following quantity is measured using a Planimeter?

**Options:
**

**Q20 –** The inside wall of a septic tank is ﬁnished with 12 mm cement plaster with 1 : 4 cement mortar. Calculate the quantity of the cement (cubic metre) required, if the size of the septic tank is 6 m x 4 m x 2 m.

**Options:
**

**Q21:-** In geodetic surveying, sum of angles (degree) of a spherical triangle should not be greater than_______.

**Options:
**

**Q22:-** Calculate the number of division of the main scale that is equal to the 8 divisions of the extended vernier.

**Options:
**

**Q23:-** An area of a ﬁeld is 250 square centimetres from a shrunk map having shrunk factor of 0.9. Calculate the original area (square metres) on the ﬁeld, if the original scale of the map is 1 cm = 50 m.

**Options:
**

**Q24:-** The length of the chain is equal to.

**Options:
**

**Q25:-** Calculate the error (mm) in the linear measurement of offset, if the length of the offset is 80 m, then the accuracy in the measurement of the length is 1 cm in 60 m.

**Options:
**

**SSC Junior Engineer (JE) All Previous Papers (NewtonDesk.com)**

**Q26:-** Calculate the whole circle bearing of a line, if its reduced bearing is N 30^{o} W.

**Options:
**

**Q27:-** Which of the following is TRUE for the limit of accuracy in a compass surveying?

**Options:
**

**Q28:-** What should be the height (m) of a lighthouse, so that it can be visible from a distance of 3 km?

**Options:
**

**Q29:-** Calculate the apex distance, if the deﬂection angle is 60 degree and the degree of curve is 8 degree.

**Options:
**

**Q30:-** Which of the following contour represents either hills or ponds?

**Options:
**

**Q31:-** Which of the soil possesses zero plasticity index?

**Options:
**

**Q32:-** Which of the following roller is used to compact the coarse-grained soil?

**Options:
**

**Q33:-** Which of the following represents expression for the passive earth pressure!

**Options:
**

**Q34:-** The internal angle of friction of a soil is 30 degree. What is the active earth pressure coefﬁcient for the soil mass?

**Options:
**

**Q35:-** Which of the following is measured in the poise?

**Options:
**

**Q36:-** Which of the following is measured with the help of hot wire anemometer?

**Options:
**

**Q37:-** A sphere of diameter 30 cm is moving with a uniform velocity of 4 m/s. The dynamic viscosity and speciﬁc gravity of the liquid is given as 0.8 poises and 0.9 respectively. What is the value of Reynolds number?

**Options:
**

**Q38:-** The sphere of diameter 0.02 m falls in a ﬂuid of kinematic viscosity of 10 stokes with the terminal velocity of 0.02 m/s. What is the value of the coefﬁcient of drag on the falling sphere?

**Options:
**

**Q39:-** What is the depth of the ﬂow (m) in a circular channel of diameter 2.0 m for the maximum velocity?

**Options:
**

**Q40:-** Which of the following expression represents the critical state of ﬂow in non-rectangular channel?

**Options:
**

**Q41:-** The roughness coefﬁcient for the channel is given as f. The Chezy’s coefﬁcient is directly proportional to______.

**Options:-
**

**Q42:-** The water ﬂows fully through the rectangular channel of lateral dimensions 4 m x 3 m. What is the velocity of ﬂow (m/s) through the channel, if the slope of energy line and Chezy’s constant is given as 0.0006 and 90 respectively?

**Options:
**

**Q43:-** Which of the following is the dimensionless parameter?

**Options:
**

**Q44:-** The power of the pump is given as 30 hp. What is the equivalent power expressed in watts?

**Options:
**

**Q45:- **Which ONE is the best method of the reclamation of the acidic soil?

**Options:
**

**Q46:-** Calculate the evaporation (mm) from a pond, if the pan evaporation is 45 mm. The pan coefﬁcient is 0.70.

**Options:
**

**Q47:-** The ruling design speed on a curve is 100 km/h and the super elevation on the curve is 7%. Calculate the ruling design radius (m) of the curve. Take coefﬁcient of the lateral friction as 0.15

**Options:
**

**Q48:-** Which of the following is the CORRECT order for increasing width of a railway gauge?

**Options:
**

**Q49:-** The population of a city in ﬁrst three continuous years is given as 6000, 8000 and 10000 respectively. What is the population of the city in the fourth continuous year, according to the geometric increase method?

**Options:
**

**Q50:-** Which of the following is used to forecast the population of old and very large city?

**Options:
**

**SSC Junior Engineer (JE) All Previous Papers (NewtonDesk.com)**

**Q51:-** The strength of a riveted lap joint is equal to its

**1. **shearing strength

**2. **bearing strength

**3. **tearing strength

**Options:
**

**Q52:-** If ﬂexural rigidity of a column whose length is L and the loaded end is free, is EI, the critical load will be

**Options:
**

**Q53:-** Maximum permissible slenderness ratio of compressive members which carry dead and superimposed load is

**Options:
**

**Q54:-** When plates are exposed to weather, tacking rivets are provided at a pitch in line not exceeding.

**Options:
**

**Q55:-** In double lacing, the thickness ‘t’ of ﬂat lacing is

**Options:
**

**Q56:-** Column footing is provided

**Options:
**

**Q57:-** In a truss girder of a bridge, a diagonal consists of mild steel ﬂat 400 I.S.F. and carries a pull of 80 tones. If the gross diameter of the rivet is 26 mm, the number of rivets required in the splice is

**Options:
**

**Q58:-** The rolled steel I – sections are most commonly used as beams because these provide:

**1.** large moment of inertia with less cross-sectional area

**2. **greater lateral stability

**Options:
**

**Q59:-** For simply supported beams, the maximum permitted deﬂection is

**Options:
**

**Q60:-** The load on a lintel is assumed as uniformly distributed if the height of the masonry above it, is up to a height of

**Options:
**

**Q61:-** Concrete containing

**Options:
**

**Q62:-** Tricalcium aluminate (C3 A)

**Options:
**

**Q63:-** The percentage of the aggregate of F.M. 2.6 to be combined with coarse aggregate of F.M. 6.8 for obtaining the aggregates of F.M. 5.4, is

**Options:
**

**Q64:-** Pick up the correct statement from the following

**Options:
**

**Q65:-** If the slump of a concrete mix is 60 mm, its workability is

**Options:
**

**Q66:-** Pick up the incorrect statement from the following: While performing preliminary test on concrete

**Options:
**

**Q67:-** While compacting the concrete by a mechanical vibrator, the slump should not exceed

**Options:
**

**Q68:-** Non-uniform compaction may cause the concrete

**Options:
**

**Q69:-** A construction joint is provided where

**Options:
**

**Q70:-** The type of aggregates not suitable for high strength concrete and for pavements subjected to tension is

**Options:
**

**Q71:-** I.S. Sieve Nos. 10 mm and 4.75 mm are generally used for grading of

**Options:
**

**Q72:-** Pick up the correct statement from the following

**Options:
**

**Q73:-** The risk of segregation is more for

**Options:
**

**Q74:-** The cement whose strength is a little lower than the ordinary cement during the ﬁrst three months but attains afterwards the same strength is known as

**Options:
**

**Q75:-** The maximum size of aggregate in concrete depends upon

**Options:
**

**SSC Junior Engineer (JE) All Previous Papers (NewtonDesk.com)**

**Q76:-** Which one of the following materials is used as a bonding admixture

**Options:
**

**Q77:-** Identify the correct statements.

**Options:
**

**Q78:-** Which of the following is/are deleterious material in aggregate?

**Options:
**

**Q79:-** In a singly reinforced beam, the effective depth is measured from its compression edge to

**Options:
**

**Q80:-** In a doubly-reinforced beam if c and t are stresses in concrete and tension reinforcement, d is the effective depth and n is depth of critical neutral axis n, the following relationship holds good

**Options:
**

**Q81:-** The maximum shear stress (q) in concrete of a reinforced cement concrete beam is

**Options:
**

**Q82:-** The anchorage value of a hook is assumed sixteen times the diameter of the bar if the angle of the bend is

**Options:
**

**Q83:-** Minimum spacing between horizontal parallel reinforcement of the same size should not be less than

**Options:
**

**Q84:-** The spacing of transverse reinforcement of column is decided by the following consideration

**Options:
**

**Q85:-** The amount of reinforcement for main bars in a slab is based upon

**Options:
**

**Q86 –** In a combined footing for two columns carrying unequal loads, the maximum hogging bending moment occurs at

**Options:
**

**Q87:-** Piles are usually driven by

**Options:
**

**Q88:-** The angle of repose of a soil is the maximum angle which the outer face of the soil mass makes

**Options:
**

**Q89:-** A compound truss may be formed by connecting two simple rigid frames by

**Options:
**

**Q90:-** The ratio of the maximum deﬂections of a simply supported beam with a central load W and of a cantilever of same length with a load Wat its free end is

**Options:
**

**Q91:-** A bar of square section of area a2 is held such that one of its diameters is vertical. The maximum shear stress will develop at a depth h where h is

**Options:
**

**Q92:-** If Ix and IY are the moments of inertia of a section about X and Y axes, the polar moment of inertia of the section is

**Options:
**

**Q93:-** In the truss shown below, the force in member DC is

**Options:
**

**Q94:-** The force in BF of the truss shown in figure below is

**Options:
**

**Q95:-** Pick up the incorrect statement from the following:

The torsional resistance of a shaft is directly proportional to

**Options:
**

**Q96:-** If the strain energy stored per unit volume in a hollow shaft subjected to a pure torque when t attains maximum shear stress fs is (17 fs)/(64 N), the ratio of the inner diameter to outer diameter is

**Options:
**

**Q97:-** The maximum height of a masonry dam of a triangular section whose base width is b and speciﬁc gravity s is

**Options:
**

**Q98:-** The locus of reaction of a two-hinged semi-circular arch is

**Options:
**

**Q99:-** The ratio of circumferential stress to the longitudinal stress in the walls of a cylindrical shell, due to ﬂowing liquid, is

**Options:
**

**Q100:-** The equivalent length of a column of length L having one end ﬁxed at the other end hinged is

**Options:
**

**SSC Junior Engineer All Previous Papers**

The post SSC JE Previous Question Paper 2018 Shift 9 (Civil Engineering) appeared first on NewtonDesk.

]]>The post SSC JE Previous Question Paper 2018 Shift 7 (Civil Engineering) appeared first on NewtonDesk.

]]>**Q1:-** Air permeability method is used in which of the following test of cement?

**Options:
**

**Q2:-** The main purpose of the soundness test of the cement is to determine the____.

**Options:
**

**Q3:-** What is the target mean strength (N/mm^{2}) of the M30 grade concrete, if the standard deviation is 5.0?

**Options:
**

**Q4:-** Which of the following method is used to make the timber ﬁre resistance?

**Options:
**

**Q5:-** In which of the following process, plug mill is used?

**Options:
**

**Q6:-** According to the IS speciﬁcations, initial setting time of the ordinary Portland cement should be____.

**Options:
**

**Q7:-** Which of the following is the main reason to provide frog in the bricks?

**Options:
**

**Q8:-** Which of the following is used as the vehicle in the enamel paints?

**Options:
**

**Q9:-** If one cement bag has 0.035m^{2} volume of cement, the number of bags required for one tonne of cement is______.

**Options:
**

**Q10:-** Which of the following is fused together to prepare the high alumina cement?

**Options:
**

**Q11:-** Accuracy in the measurement of the volume in cubic meter should be near to_____.

**Options:
**

**Q12:-** Deduction for total length of the central line at the corner where two walls meet is_____.

**Options:
**

**Q13:-** Which of the following is estimated by using a bar bending schedule?

**Options:
**

**Q14:-** Which of the following is measured in square meter?

**Options:
**

**Q15:-** Which of the following statements are the CORRECT for estimation of plastering?

**1)** For opening up to 0.5 square meters, no deduction is made.

**2)** For opening exceeding 0.5 square meters and up to 3 square meters, deduction is made for one face.

**3)** For opening up to 3 square meters, deduction is made for both faces.

**4)** For ends of beams, no deduction is made.

**Options:
**

**Q16:-** Chowkhat or frame of the door is measured in______.

**Options:
**

**Q17:-** Calculate the preliminary estimate for a building having a total carpet area of 500 square meters. Extra provision as 10% of the carpet area is provided for walls and verandah. The plinth area rate is Rs. 1,200 per square meter.

**Options:
**

**Q18:-** Calculate the volume of earth work for an embankment of length L and width B. The mean depth of the embankment is D and side slope is S : 1.Using mid- sectional area method.

**Options:
**

**Q19:-** Calculate the quantity of the sand required for 8 cubic meter brick work with cement mortar (1 : 3).

**Options:
**

**Q20:-** Calculate the capitalized value of a building having annual rent of Rs. 20,000 and highest rate of interest is 5%.

**Options:
**

**Q21:-** Plumb bob lines at two different places in plane surveying are_____.

**Options:
**

**Q22:-** A curve whose radius varies from inﬁnity to a certain value is called______.

**Options:
**

**Q23:-** What is the representative fraction for a scale of 10 cm = 20 km?

**Options:
**

**Q24:-** The line which is used to collect the details of the objects in an area is called_____.

**Options:
**

**Q25:-** Calculate true bearing of a line, if magnetic bearing of the line is S 60^{o} E and magnetic declination is 5^{o} eastward.

**Options:
**

**SSC Junior Engineer (JE) All Previous Papers (NewtonDesk.com)**

**Q26:-** Calculate the total correction (m) required, if a line measured using 20 m chain is 2380 m. Actual length of the chain is 20.2 m.

**Options:
**

**Q27:-** The least count of a theodolite is_____.

**Options:
**

**Q28:-** Calculate the corrected staff reading at point A, if the staff reading is taken from an instrument which is set at a distance of 1.5 km from the point A 3.46 m.

**Options:
**

**Q29:-** Calculate the intersect angle (degree) for the anallactic telescope.

**Options:
**

**Q30:-** Which of the following statements are CORRECT for contour map?

**1)** Parallel contour shows uniform slope.

**2)** Very closed contour shows steep slope.

**3)** Very closed contour shows ﬂat area.

**4)** Two contours at different elevation cut at right angle.

**Options:
**

**Q31:-** What is the terminal velocity (m/s) for a 4 g particle which is falling in the water with projected area of 5 sq. cm? The coefﬁcient of drag is given as 0.47.

**Options:
**

**Q32:-** The coefﬁcient of curvature for well graded soil lies between______.

**Options:
**

**Q33:-** The coefﬁcient of uniformity for well graded sand must be greater than______.

**Options:
**

**Q34:-** Casagrande’s apparatus is used to determine_____.

**Options:
**

**Q35:-** On increasing temperature, the viscosity of gas_____.

**Options:
**

**Q36:-** If the 90% volume of iceberg is immersed in the water and only 10% volume is above the water surface. What is the density of the iceberg, the density of sea water is given as 1025 kg/m^{3}?

**Options:
**

**Q37:-** The head developed by the centrifugal pump is 40 m while operating at the speed of 750 rpm. If the rated capacity is given as 50 cumec, what is the speciﬁc speed of centrifugal pump?

**Options:
**

**Q38:-** Surface tension for an ideal ﬂuid is_____.

**Options:
**

**Q39:-** Which of the following is not true about density of the gases?

**Options:
**

**Q40:-** The stable equilibrium is achieved in the ﬂoating body when_____.

**Options:
**

**Q41:-** What is the value of friction factor, if the diameter of pipe is 50 cm and roughness height is 0.25 cm?

**Options:
**

**Q42:**– What is the head loss in pipe due to friction over the length of 30 km, if the diameter of pipe is 80 cm and velocity of ﬂow is 30 cm/s? Take friction factor 0.032.

**Options:
**

**Q43:-** The range of Froud number for the weak jump is_____.

**Options:
**

**Q44:-** What is the velocity (m/s) with which elementary wave can travel upstream, if the velocity of ﬂow is 2 m/s and depth of ﬂow in channel is 1 m?

**Options:
**

**Q45:-** Which one is the best method of reclamation of the alkaline soil?

**Options:
**

**Q46:-** The intensity of the rainfall for successive 1 hours period of a 6 hours storm are 2, 6, 8, 9, 7 and 3 cm/hr. The runoff is 4 cm/hr. Calculate the Ф-index (cm/hr).

**Options:
**

**Q47:-** The intermediate sight distance is equal to______.

**Options:
**

**Q48:-** Calculate the equivalent radius of the resisting section of 20 cm thick slab, if the ratio of the radius of wheel load distribution to the thickness of the slab is 0.5.

**Options:
**

**Q49:-** Which of the following is responsible for the corrosion of concrete sewers?

**Options:
**

**Q50:–** Which of the following is responsible for the depletion of ozone layer in the upper atmosphere?

**Options:
**

**SSC Junior Engineer (JE) All Previous Papers (NewtonDesk.com)**

**Q51:-** Live loads, with time can vary in:-

**Options:
**

**Q52:-** Impact load results from which type of effects of loads applied?

**Options:
**

**Q53:-** Which type of drainage system will collect the rainwater?

**Options:
**

**Q54:-** Moment at a hinge will be:-

**Options:
**

**Q55:-** For the validity of principle of superposition, materials should behave in which manner?

**Options:
**

**Q56:-** If 4 reactions are acting on a beam, then the system is:-

**Options:
**

**Q57:-** Which of the following statements is true?

**1.** If a truss consists of a non-triangular element, then it will essentially be unstable.

**2.** In the above cases, instability is the most probable occurrence, but there are a lot of examples which are unstable.

**Options:
**

**Q58:-** Which of the following statements is true?

**1.** A roller is provided at end of a bridge truss to allow thermal expansion.

**2.** A roller provides freedom of deformation in horizontal plane in case of thermal expansion.

**Options:
**

**Q59:-** Trusses and frames are different as:-

**Options:
**

**Q60:-** Given that J is no. of joints. B and R are no. of members and no. of reactions. If B = 5, R = 4 and J = 4, then the truss is:-

**Options:
**

**Q61:-** What is the ideal water-cement ratio to be used while hand mixing?

**Options:
**

**Q62:-** As water cement ratio increases, ______also increases.

**Options:
**

**Q63:-** Ready mix plant and central mix plant differ in:

**Options:
**

**Q64:-** Compacting of concrete is done to:

**Options:
**

**Q65:-** Which of the following statements is true?

**1. **A gap of 0.3m is to be maintained between cement bag and wall, while storing cement.

**2. **A gap 100 cm is to be maintained between cement bag and wall, while storing cement.

**Options:
**

**Q66:-** Which of the following statements is true?

**1. **Impermeability is a property of fresh concrete.

**2. **Impermeability is a not property of fresh concrete.

**3. **Impermeability is nothing to with concrete at all.

**Options:
**

**Q67:-** M15 concrete is used for:

**Options:
**

**Q68:-** Tensile strength of concrete is found out using:

**Options:
**

**Q69:-** A slump of 50-100mm can be used for:

**Options:
**

**Q70:-** Before plastering, the surface has to be:

**Options:
**

**Q71:-** Wood surface requires______ coats of plastering.

**Options:
**

**Q72:-** For the construction of the retaining structures, the type of concrete mix to be used is

**1.** 1:3:6

**2. **1:2:4

**3. **1:1.5:3

**4.** 1:1:2

**Options:
**

**Q73:-** For preparing ordinary concrete, what is the quantity of water used?

**Options:
**

**Q74:-** If the various concrete ingredients i.e. cement, sand, aggregates are in the ratio of 1:3:6, the grade of concrete is

**Options:
**

**Q75:-** For which of the following is an ideal warehouse is provided?

**Options:
**

**SSC Junior Engineer (JE) All Previous Papers (NewtonDesk.com)**

**Q76:-** If the internal dimensions of a ware house are 15 m x 5.6 m and the maximum height of piles is 2.70 m, then what is the maximum number of bags to be stored in two piles?

**Options:
**

**Q77:-** Which of the following statements is true?

**Options:
**

**Q78:-** For concreting tunnel linings, transportation of concrete is done by which of the following?

**Options:
**

**Q79:-** ______is used to construct very thin, hard and strong surface

**Options:
**

**Q80:-** How many methods of ferro cementing are there?

**Options:
**

**Q81:–** The effective width of a column strip of a ﬂat slab that is taken into consideration?

**Options:
**

**Q82:-** If W is the Uniformly distributed load on a circular slab of radius R fixed at its ends, the maximum positive radial R fixed at its ends, the maximum positive radial moment at its center is

**A)** 3WR^{2} / 16

**B)** 2WR^{2} / 16

**C)** WR^{2} / 16

**Options:
**

**Q83:-** For initial estimate for a beam design, the width is assumed

**Options:
**

**Q84:-** The thickness of the topping of a ribbed slab, varies between

**Options:
**

**Q85:-** For a ribbed slab

**Options:
**

**Q86:-** Which of the following statements is true?

**Options:
**

**Q87:-** According to I.S.: 456, 1978 the thickness of reinforced concrete footing on piles at its edges is kept less than

**Options:
**

**Q88:-** If the diameter of longitudinal bars of a square column is 16 mm, the diameter of lateral ties should not be less than

**Options:
**

**Q89:-** Maximum strain theory for the failure of a material at the elastic limit is known as

**Options:
**

**Q90:-** Gradually applied static loads do not change with time their

**Options:
**

**Q91:-** The thickness of slabs and beams must be measured to the nearest:-

**Options:
**

**Q92:-** A composite beam is composed of two equal strips one of brass and other of steel. If the temperature is raised

**Options:
**

**Q93:-** A linear force-deformation relation is obtained in materials

**Options:
**

**Q94:-** In a structure, why are the cables and wires are generally used?

**Options:
**

**Q95:-** The ability of a material to absorb energy till the elastic limit is known as

**1)** Ductility

**2)** Malleability

**3)** Elasticity

**4)** None of these

**Answer:** None of these

**Q96:-** If a material has identical properties in all directions, It is said to be

**Options:
**

**Q97:-** If all the dimensions of a prismatic bar are double, then the maximum stress produced in it under its weight will

**Options:
**

**Q98:-** The ratio of the length of the column to the minimum radius of gyration of the cross sectional area of the column is known as

**Options:
**

**Q99:-** In a built-up section carrying tensile force, the ﬂanges of two channels are turned outward

**Options:
**

**Q100:-** A tension member, if subjected to possible reversal of stress due to wind, the slenderness ratio of the member should not exceed

**Options:
**

**SSC Junior Engineer All Previous Papers**

The post SSC JE Previous Question Paper 2018 Shift 7 (Civil Engineering) appeared first on NewtonDesk.

]]>The post SSC JE Previous Question Paper 2018 Shift 6 (Civil Engineering) appeared first on NewtonDesk.

]]>**Q1:-** Which of the following defect appears due to presences of alkalies in the bricks?

**Options:**

**1)** Bloating

**2)** Black core

**3)** Cracks

**4)** Efflorescence

**Answer:** Efflorescence

**Q2:-** For which of the following process Boucherie process is used?

**Options:
**

**Q3:-** What is the percentage content of asphalt in the cut-back asphalt?

**Options:
**

**Q4:-** In which of the following test of bitumen Ring and Ball apparatus is used?

**Options:
**

**Q5:-** The defect in timber that causes longitudinal separation of woods between the annular rings is known as_____.

**Options:
**

**Q6:-** Which of the seasoning method is adopted for the rapid seasoning of timber on large scale to obtain any desired moisture content?

**Options:
**

**Q7:-** What is the gel-space ratio of a sample of concrete, if the concrete is made with the 600 g of cement with the water-cement ratio of 0.65?

**Options:
**

**Q8:-** The concrete sample is cured at 15 degree Celsius for 28 days. If the origin temperature is taken as -11 degree Celsius, what is the maturity (degree Celsius days) of concrete sample?

**Options:
**

**Q9:-** The ingredient of paint which are used to hide the surface irregularities and imparts color is known as______.

**Options:
**

**Q10:-** If the least lateral dimension of aggregate is less than 0.6 times of its mean dimension, the aggregate is classified as_____.

**Options:
**

**Q11:-** Explosive required for blasting is measured in______.

**Options:
**

**Q12:-** Which of the following is the correct statement for length of the long wall as one move from earthwork to brick work in super structure in long and short wall method?

**Options:
**

**Q13:-** Calculate an approximate estimate (Rs.) of the building with total plinth area of the building is 500 square meters. The rate of the plinth area is Rs. 3,000 per square meters. The costs of the water supply and contingencies are 7% and 5% of cost of construction respectively.

**Options:
**

**Q14:-** Calculate the cost of the plastering required for a wall of 4 m long, 3.5 m high and 300 mm thick, if the rate of plastering is Rs. 12 per square meter.

**Options:
**

**Q15:-** Which of the following is the unit of measurement for the sills of windows?

**Options:
**

**Q16:-** Which of the following area is included in the plinth area of the building?

**Options:
**

**Q17:-** Which of the following method is used for estimation of depreciation of building?

**Options:
**

**Q18:-** Capitalized value of a property is the product of_____.

**Options:
**

**Q19:-** Calculate the total quantity (cubic meter) of the coarse aggregate required for an isolated rectangular footing of size 3 m x 2 m, if 1 : 2 : 4 cement concrete is used. The depth of the footing is 600 mm.

**Options:
**

**Q20:-** What is the actual size (mm) of the standard modular brick as per Indian Standards?

**Options:
**

**Q21:-** Which of the following statement is not correct for the principle of surveying?

**Options:
**

**Q22:**– Which one of the following set of internal angles (degree) of a triangle does not show well condition triangle?

**Options:
**

**Q23:-** Calculate the magnetic declination, if the magnetic bearing of a line is N 81^{o}E and true bearing of the line N 77^{o}E.

**Options:
**

**Q24:-** The back sight reading taken from a level at a bench mark is 1.56 m and a fore sight at a point A is taken on an inverted staff is 1.65 m. Calculate the reduced level of the point A, if the reduced level of the bench mark is 150 m.

**Options:
**

**Q25:-** The ratio of focal length of the objective to stadia interval is called______.

**Options:
**

**SSC Junior Engineer (JE) All Previous Papers (NewtonDesk.com)**

**Q26:-** Calculate the additive and multiplying constant, if the focal length of the objective glass is 250 mm, stadia intercept is 2 mm and distance of the instrument axis from the center of the object glass is 190 mm.

**Options:
**

**Q27:-** What is the function of the plumbing fork in plane table surveying?

**Options:
**

**Q28:-** The vernier scale in which 10 divisions of the viernier scale is equal to 9 divisions of the main scale is called_____.

**Options:
**

**Q29:-** The maximum error (mm) on the drawing should not be greater than_____.

**Options:
**

**Q30:-** Which of the following is true for the correction for the curvature?

**Options:
**

**Q31:-** The void ratio of a soil sample is given by 0.58. What is the porosity of soil sample?

**Options:
**

**Q32:-** Which of the following bonding is responsible to combine the silica-gibbsite sheet in kaolinite clay mineral?

**Options:
**

**Q33:-** The maximum dry density and optimum moisture content of a soil is given by 1.65 gm/cc and 20.5% respectively. What is the percentage of air content of soil at OMC, if the specific gravity of particles is given by 2.65?

**Options:
**

**Q34:-** Which of the following type of roller is most suitable for proof rolling subgrades and for finishing operation of fills with clayey or sandy soils?

**Options:
**

**Q35:-** The value obtained from dividing limiting value of circulation by area of closed contour is known as______.

**Options:
**

**Q36:-** In which of the following case flow net cannot be drawn?

**Options:
**

**Q37:-** Which of the following expression represent the simplified form of Colebrook equation use to calculate the friction factor, if variable have their standard meanings?

**Options:**

**Q38:-** If the velocity gradient is given by θ and dynamic viscosity of the fluid is given by μ. What is the shear stress on the wall of the boundary layer in the direction of motion?

**Options:
**

**Q39:-** In which of the following unit kinematic viscosity of fluid is measured?

**Options:
**

**Q40:-** The hydraulic radius and cross-sectional area of a channel is given by 4.5 m and 18.5 sq.m respectively. What is the wetted perimeter (m) of channel?

**Options:
**

**Q41:-** Which of the following dimension represents the pressure?

**Options:
**

**Q42:-** The water is flowing through 800 m long circular pipe of diameter 30 cm with the velocity of 0.26 m/s. The friction factor for the pipe is given as 0.016. What is the head loss (cm) in the pipe due to friction?

**Options:
**

**Q43:-** If at the particular instant of time, the velocity of flow does not change with location over a specific region, the flow is called as_____.

**Options:
**

**Q44:-** Which of the following expression represents the continuity equation in case of steady Incompressible flow?

**Options:**

**Q45:-** Which of the following statement is correct for sprinkler irrigation method?

**Options:
**

**Q46:-** Calculate the permanent welting point if the depth of water in the root at the permanent welting point per meter depth of soil is 0.4 m. the dry density of the soil is 16 kN/m^{2}.

**Options:
**

**Q47:-** Which of the following is correct statement for the cross slope of the shoulder?

**Options:
**

**Q48:-** Calculate the safe stopping sight distance for a design speed of 60 km/h for two way traffic on a single lane road. The reaction time of driver is 2.5 sec.

**Options:
**

**Q49:-** What is the theoretical oxygen demand (mg/l) of a glucose solution of concentration 500 mg/l?

**Options:
**

**Q50:-** Which one of the following emission is the primary reason for the depletion of the ozone layer?

**Options:
**

**SSC Junior Engineer (JE) All Previous Papers (NewtonDesk.com)**

**Q51:-** According to the Unwin’s formula, if t is the thickness of the plate in mm, the nominal diameter of the rivet is

**Options:
**

**Q52:-** Effective length of a column effectively held in position at both ends and restrained in direction at one end is

**Options:
**

**Q53:-** The most economical section for a column is

**Options:
**

**Q54:-** If the unsupported length of a stanchion is 4 meters and least radius of gyration of its cross-section is 5, the slenderness ratio of the stanchion is

**Options:
**

**Q55:-** A column splice is used to increase

**Options:
**

**Q56:-** A structural member subjected to tensile force in a direction parallel to its longitudinal axis, is generally known as

**Options:
**

**Q57:-** A major beam in a building structure is known as

**Options:
**

**Q58:-** In rolled steel beams, shear force is mostly resisted by

**Options:
**

**Q59:-** For a cantilever beam of length L built-in at the support and restrained against torsion at the free end, the effective projecting length ‘l’ is

**Options:
**

**Q60:-** Pick up the correct statement from the following:

**Options:
**

**Q61:-** Concrete mainly consists of

**Options:
**

**Q62:-** A concrete using an air entrained cement

**Options:
**

**Q63:-** of keeping concrete wet to enable it to attain full strength is known as:-

**Options:
**

**Q64:-** Segregation is responsible for

**Options:
**

**Q65:-** W_{p} and W_{f} are the weights of a cylinder containing partially compacted and fully compacted concrete. If the compaction factor (W_{p}/W_{f}) is 0.95, the workability of concrete is

**Options:
**

**Q66:-** The process of hardening the concrete by keeping its surface moist is known

**Options:
**

**Q67:-** Pick up the correct statement from the following

**Options:
**

**Q68:-** The final operation of finishing floors is known as

**Options:
**

**Q69:-** Expansion joints are provided if the length of concrete structures exceeds

**Options:
**

**Q70:-** A flaky aggregate is said to be elongated if its length is

**Options:
**

**Q71:-** For the construction of cement concrete floor, the maximum permissible size of aggregates is

**Options:
**

**Q72:-** Sand requiring a high water cement ratio, belongs to

**Options:
**

**Q73:-** The maximum amount of dust which may be permitted in aggregates is

**Options:
**

**Q74:-** The cement becomes useless if its absorbed moisture content exceeds

**Options:
**

**Q75:-** For concreting the surface of the runways, roads and pavements, the aggregate impact value shall not exceed by weight

**Options:
**

**SSC Junior Engineer (JE) All Previous Papers (NewtonDesk.com)**

**Q76:-** Pick up the correct statement from the following

**Options:
**

**Q77:-** A sample of cement is said to be sound when it does not contain free

**Options:
**

**Q78:-** Consider the following statements regarding aggregates:

**1.** Dry aggregates absorb water from the mixing water and thus affect the workability

**2. **Aggregates containing surface moisture contribute extra

**3. **The free moisture content in fine aggregate results in reduction of volume

**4. **The free moisture content in coarse aggregate results in bulking of volume.

Of these statements:

**Options:
**

**Q79:-** If the permissible compressive and tensile stresses in a single reinforced beam are 50 kg/cm2 and 1400 kg/cm2 respectively and the modular ratio is 18, the percentage are At of the steel required for an economic section, is

**Options:
**

**Q80:-** The maximum shear stress (qmax) in a rectangular beam is

**Options:
**

**Q81:-** For M 150 mix concrete, according to I.S. specifications, local bond stress is

**Options:
**

**Q82:-** The Properly bent up and hooked bar for resisting diagonal tension is beams is shown in which of the following figures?

**Options:
**

**Q83:-** An intermediate T-beam reinforced with two layers of tensile steel with clear cover 13 cm encasted with the floor of a hall 12 meters by 7 meters, is spaced at 3 meters from adjoining beams and if the width of the beam is 20 cm, the breadth of the flange is

**Options:
**

**Q84:-** Long and short spans of a two way slab are l_{y} and l_{x} and load on the slab acting on strips parallel to l_{x} and l_{y} be w_{x} and w_{y} respectively. According to Rankine Grashoff theory

**Options:
**

**Q85:-** If the diameter of the main reinforcement in a slab is 16 mm, the concrete cover to main bars is

**Options:
**

**Q86:-** Top bars are extended to the projecting parts of the combined footing of two columns L distance apart for a distance of

**Options:
**

**Q87:-** A pile of length L carrying a uniformly distributed load W per meter length is suspended at two points, the maximum B.M. at the center of the pile or at the points of suspension is

**Options:
**

**Q88:-** If W is the weight of a retaining wall and P is the horizontal earth pressure, the factor of safety against sliding is

**Options:
**

**Q89:-** The deflection of a uniform circular bar of diameter d and length l, which extends by an amount e under a tensile pull W, when it carries the same load at its mid-span is

**Options:
**

**Q90:-** The maximum deflection due to a uniformly distributed load w/unit length over entire span of a cantilever of length l and of flexural rigidity EI, is

**Options:
**

**Q91:-** If the normal stresses due to longitudinal and transverse loads on a bar are σ_{1} and σ_{2} respectively, the tangential component of the stress on an inclined plane through θ^{o}, the longitudinal load is

**Options:
**

**Q92:-** The moment of inertia of a triangular section (height h, base b) about its base is

**Options:
**

**Q93:-** In the truss shown below, the force in the member AC is

**Options:
**

**Q94:-** The force in BC of the truss shown in the figure below is

**Options:-
**

**Q95:-** If a solid shaft (diameter 20 cm, length 400 cm, N = 0.8 x 105 N/mm^{2}) when subjected to a twisting moment, produces maximum shear stress of 50 N/mm^{2}, the angle of twist in radians is

**Options:
**

**Q96:-** The load on a spring per unit deflection is called

**Options:
**

**Q97:-** In case of a simply supported rectangular beam of span L and loaded with a central load W, the length of elasto-plastic zone of the plastic hinge is

**Options:
**

**Q98:-** There are two hinged semicircular arches A,B and C of radii 5 m, 7.5 m, and 10 m respectively and each carries a concentrated load W at their crowns. The horizontal thrust at their supports will be in the ratio of

**Options:
**

**Q99:-** For determining the support reactions at A and B of a three-hinged arch, points B and C are joined and produced to intersect the load line at D and a line parallel to the load line through A at D’. Distances AD,DD’ and AD’ when measured were 4 cm, 3 cm and 5 cm respectively. The angle between the reactions at A and B is

**Options:
**

**Q100:-** The equivalent length of a column of length L having one end fixed at the other end free is L

**Options:
**

**SSC Junior Engineer All Previous Papers**

The post SSC JE Previous Question Paper 2018 Shift 6 (Civil Engineering) appeared first on NewtonDesk.

]]>The post SSC JE Previous Question Paper 2018 Shift 5 (Civil Engineering) appeared first on NewtonDesk.

]]>**Q 1:** What is the amount of water used to conduct the initial setting time test of cement which has a standard consistency of P.

**Options:
**

**Q 2:** What is the water-cement ratio (w/c) required to complete the reactions in hydration of cement?

**Options:
**

**Q 3:** What is the temperature range in the cement kiln?

**Options
**

**Q 4:** Which of the following is used to test the ﬁneness of a cement?

**Options:
**

**Q 5:** What is the ratio (approximate) of 7 days and 28 days strength of cement concrete?

**Options:
**

**Q 6:** Compaction factor is deﬁned as the ratio of

**Options:
**

**Q 7:** Which of the following is CORRECT for the workability of the concrete having the compaction factor of 0.92?

**Options:
**

**Q 8:** Which of the following shows the CORRECT expression for target mean (f_{cm}) of concrete, if the characteristic strength and standard deviation is given by f_{ck} and σ respectively?

**Options:
**

**Q 9:** Which of the following constituents is present in the blast furnace slag?

**Options:
**

**Q 10:** Which of the timber is used to make the goods that are used in the sports industry?

**Options:
**

**Q 11:** Which of the following estimate is carried out if the sectioned estimate exceeds 5% due to the change in the

**Options:
**

**Q 12:** For estimation of the masonry work and excavation work, accuracy requirement in the measurement of the length as compared to thickness or width is

**Options:
**

**Q 13:** A wall of width 300 mm contains two T junctions. The height of the wall is 3 m and total length of the central line is 150 m. Calculate the quantity of the brick work (in cubic meter) using central line method.

**Options:
**

**Q 14:** Which of the following is measured in cubic meter?

**Options:
**

**Q 15:** For estimation of the brick masonry, no deduction is made for the end of the rafter up to the area (square inch) of

**Options:
**

**Q 16:** Calculate the quantity (cubic meter) of the concrete used in a pier of 1.2 m diameter and 6 m length. The pier is reinforced with 8 bars of 25 mm diameter.

**Options:
**

**Q 17:** In long wall and short wall method, the length of the short wall is the equal to the center to center length of wall minus

**Options:
**

**Q 18:** Calculate the quantity (cubic meter) of the earthwork for a canal of 50 m long. Depths of canal at two extreme sections are 3 m and 5 m. The bottom width and top width of the canal are 2 m and 4 m. Use midsection method.

**Options:
**

**Q 19:** Calculate the value of a pump after 5 years, if the annual depreciation value is Rs. 200. The original cost of the pump is Rs. 3000 and the useful life of the pump is 10 years.

**Options:
**

**Q 20:** Which of the following is NOT included in the ﬂoor area?

**1)** Clear coverage area

**2)** Area of the walls

**3)** Sills of the doors

**4)** Sills of the windows

**Options:
**

**Q 21:** The scale in which three successive dimensions can be measured at a time is called

**Options:
**

**Q 22:** Which one is the CORRECT option for the cumulative errors?

**1.** It decreases with an increase in measurement.

**2. **It is directly proportional to the length of the line.

**3. **It may be positive or negative.

**4.** It is inversely proportional to the length of the line.

**Options:
**

**Q 23:** The fore bearing of a line is 30 degree, Calculate the back bearing of a line (in degree)

**Options:
**

**Q 24:** In which of the following plane, the telescope of the theodolite is turned in order to swing?

**Options:
**

**SSC Junior Engineer (JE) All Previous Papers**

**Q 25:** Relative error of the closer is the ratio of

**Options:
**

**Q 26:** Determine the number of divisions required on the vernier scale, if it is combined with the main scale of least count 0.5 mm. The least count of the combination required is 0.05 mm for the direct vernier.

**Options:
**

**Q 27:** The height of any point with respect to mean sea level is called

**Options:
**

**Q 28:** Calculate the reduced level (m) of a point A, if the staff readings at the point A and benchmark are 2.8 m and 2.5 m respectively. The reduced level of the benchmark is 100m.

**Options:
**

**Q 29:** Calculate the horizontal distance between the staff and instrument, if the staff readings are 1.4 m and 2.9 m, which corresponds to lower and the upper horizontal lines of cross hair. The lens of the telescope of the tachometer is of anallactic lens.

**Options:
**

**Q 30:** The volume of an embankment having a total length of L and cross section areas of four sections at an interval of H are A_{1}, A_{2}, A_{3}, A_{4} using the trapezoidal method is______.

**Option:
**

**Q 31:** If the damping ratio is given by 0.10 and damping coefﬁcient is 225 kN-s/m. What is the value of critical damping ratio (kN-s/m)?

**Options:
**

**Q 32:** What is the value of active earth pressure coefﬁcient for the soil having an internal angle of friction of 30 degree.

**Options:
**

**Q 33:** If the voids of a soil are completely ﬁlled with air, then it is called

**Options:
**

**Q 34:** Which one of the following represents the measure of particle size range?

**Options:
**

**Q 35:** Calculate the kinematic viscosity (stoke) of the ﬂuid, if the dynamic viscosity of ﬂuid is 0.5 poise and speciﬁc gravity is 0.4?

**Options:
**

**Q 36:** Which of the following causes the major loss in the long pipes?

**Options:
**

**Q 37:** Which of the following instrument is used for measuring the discharge?

**Options:
**

**Q 38:** Calculate the diameter of a pipe of 32000 m long, if it is equivalent to another pipe of 0.2 m diameter and 1000 m long.

**Options:
**

**Q 39:** Which of the following represents the critical velocity for the discharge per unit width of q m^{3}/s/m from the wide rectangular channel?

**Options:
**

**Q 40:** Which of the following is equivalent to one kilo-Pascal?

**Options:
**

**Q 41:** What is the theoretical value of the coefﬁcient of contraction for the sharp edge oriﬁce?

**Options:
**

**Q 42:** Hydraulic radius of the channel is deﬁned as the ratio of

**Options:
**

**Q 43:** In which type of the following ﬂow, loses are more?

**Options:
**

**Q 44:** If the diameter of the pipe is given as D, what is the maximum thickness of the boundary layer?

**Options:
**

**Q 45:** Calculate the critical velocity (m/sec) of a channel using Kennedy’s theory, if the depth of ﬂow is 3 m.

**Options:
**

**Q 46:** Which one of the followings is NOT a cause of water logging?

**Options:
**

**Q 47:** Which instrument is used for the measurement of the longitudinal coefﬁcient of friction?

**Options:
**

**Q 48:** Calculate the capacity (vehicle per hour) of the road when reaction time of the driver is 2 seconds. The design speed is 80 kmph and average length of the vehicle is 6 m. Take coefﬁcient of friction as 0.35.

**Options:
**

**Q 49:** Which of the following is the result of disinfection of water?

**Options:
**

**Q 50:** Which of the following process includes chlorination of water above the break point?

**Options:
**

**SSC Junior Engineer (JE) All Previous Papers**

**Q 51:** Building codes require the partition load to be considered even without partition if live load is less than:-

**Options:
**

**Q 52:** If R_{1} = 1.1 and R_{z} = 1.2, then what is value of L_{r} (in psf) ?

**Options:
**

**Q 53:** How many constraints are there in a ﬁxed support in a planar system?

**Options:
**

**Q 54:** Why are steel reinforcing rods used in concrete beams:-

**Options:
**

**Q 55:** In planar system, X parts/members are there with Y no. of forces. If Y > 3X, the system is:-

**Options:
**

**Q 56:** How many cases out of the following are improperly constrained?

**1. **Parallel forces

**2. **Concurrent forces

**3.** Perpendicular forces

**4. **Only moment

**Options:
**

**Q 57:** The space between adjacent bents in a roof truss is called:-

**Options:
**

**Q 58:** There is no bending stresses in truss due to:-

**Options:
**

**Q 59:** A truss formed by joining two or more simple trusses is called:-

**Options:
**

**Q 60:** If a truss is internally unstable, then we should use it when it is:-

**Options:
**

**Q 61:** How many types of chemical admixture are there?

**Options:
**

**Q 62:** Which component of concrete gives it desired compressive strength?

**Options:
**

**Q 63:** What is the maximum height through which concrete can be poured?

**Options:
**

**Q 64:** Which is the best method for curing of concrete ﬂat surfaces?

**Options:
**

**Q 65:** The accumulation of water on outer surface of concrete is:

**Options:
**

**Q 66:** Which admixture is used to improve work ability of concrete?

**Options:
**

**Q 67:** Higher the cement content,

**Options:
**

**Q 68:** Compaction factor for heavily reinforced section with vibration is:

**Options:
**

**Q 69:** If cylinder specimen is used to test compressive strength of concrete, equivalent cubes strength can be found using:

**Options:
**

**Q 70:** Which of the below is not a plaster type based on material?

**Options:
**

**Q 71:** Which of the below is not a plaster ﬁnish?

**Options:
**

**Q 72:** If the depth of moist sand in a cylinder is 15 cm and the depth of the sand when fully inundated with water is 12 cm, then what is the bulking of the moist sand?

**Options:
**

**Q 73:** If P, Y and Z are weights of cement, fine aggregates and coarse appregates respectively and W/C is the water cement ratio, the minimum quantity of water to be added to first batch is obtained by the equation.

**A) **1P + 0.3Y + 0.1Z = (w/c) x P

**B) **3P + 0.1Y + 0.01Z = (w/c) x P

**C) **4P + 0.2Y + 0.01Z = (w/c) x P

**D) **5P + 0.3Y + 0.01Z = (w/c) x P

**Options:
**

**Q 74:** How do we reduce the shrinkage in concrete?

**Options:
**

**Q 75:** Which of the following are the speciﬁcations of a cement bag for storage?

**A)** Weight 50 kg

**B)** Height 18 cm

**C)** Plan area 3000 sq.cm

**D)** Volume 35 liters

**Options:
**

**SSC Junior Engineer (JE) All Previous Papers**

**Q 76:** What should be done to ensure constant moisture content in aggregates?

**Options:
**

**Q 77:** For batching 1:3:6 concrete mix by volume, which of the following are the ingredients required per bag of 50kg cement?

**Options:
**

**Q 78:** Which of the following statements is/are true?

**Options:
**

**Q 79:** In a R.C.C structure, the tension zone lies in the:

**Options:
**

**Q 180:** In a Pre Stressed Concrete, the tensioning system may be classiﬁed into:

**Options:
**

**Q 81:** A circular slab subjected to external loading, deﬂects to form:

**Options:
**

**Q 82:** For normal cases, stiffness of a simply supported beam is satisﬁed if the ratio of its span to its overall depth does not exceed

**Options:
**

**Q 83:** If the length of a wall on either side of a lintel opening is at least half of its effective span L, the load W carried by the lintel is equivalent to the weight of brick work contained in an equilateral triangle, producing a maximum bending moment

**A)** WL / 2

**B)** WL / 4

**C)** WL / 6

**D)** WL / 8

**E)** WL / 12

**Options:
**

**Q 84:** The maximum diameter of a bar used in a ribbed slab is

**Options:
**

**Q 85:** A foundation is called shallow if its depth is

**Options:
**

**Q 86:** If P kg/m^{2} is the upward pressure on the slab of a plain concrete footing whose projection on either side of the wall is ? cm, the depth of foundation D is given by

**A)** D = 0.00775 ?√P

**B)** D = 0.0775 ?√P

**C)** D = 0.775 P√?

**Options:
**

**Q 87:** Which of the following statements is true?

**Options:
**

**Q 88:** If the Length of a combined footing for two columns ** l** meters apart is L and the projection on the left side of the exterior column, in order to have a uniformly distributed load is (Where x̅ is the distance of center of gravity of column loads)

**Q 89:** Maximum principal stress theory for the failure of a material at elastic limit is known as

**Options:
**

**Q 90:** The general expression for the B.M. of a beam of length ** l **is M = (wl/2)x – (wx

**Q 91:** The moment of inertia of a rectangular section of width B and depth D about an axis passing through C.G. and parallel to its width is

**A]** BD^{2}/6

**B]** BD^{3}/6

**C]** BD^{3}/12

**D]** B^{2}D/6

**Options:
**

**Q 92:** Pick up the correct statement from the following.

**Options:
**

**Q 93:** “Poisson’s ratio” is deﬁned as:

**Options:
**

**Q 94:** Which of the following statements is false?

**Options:
**

**Q 95:** If the Young’s modulus of elasticity of a material is twice its modulus of rigidity, then the Poisson’s ratio of the material is

**Options:
**

**Q 96:** In case of biaxial stress, the maximum value of shear stress is given by

**Options:
**

**Q 97:** Which of the following statements is true?

**Options:
**

**Q 98:** The slenderness ratio of a column is zero when its

**Options:
**

**Q 99:** In a tension member if one or more than one rivet holes are off the line, the failure of the member depends upon

**Options:
**

**Q 100:** For double angles carrying tension, placed back to back and connected to either side of the gusset plate, the sectional area of the section, is equal to the cross sectional area of

**Options:
**

**SSC Junior Engineer All Previous Papers**

The post SSC JE Previous Question Paper 2018 Shift 5 (Civil Engineering) appeared first on NewtonDesk.

]]>