The post SSC JE Previous Question Paper 2018 Shift 11 (Civil Engineering) appeared first on NewtonDesk.

]]>**Q1:-** Which one of the following treatment is used to make the timber ﬁre resistance?

**Options:
**

**Q2:-** The dynamic modulus of elasticity of sample of concrete is compared in______.

**Options:
**

**Q3:-** Efﬂorescence in bricks causes due to_______.

**Options:
**

**Q4:-** Which of the following compounds of Portland cement reacts immediately with the water and set early?

**Options:
**

**Q5:-** In the concrete mix with proportions of its ingredient 1:3:6, the actual quantity of sand per unit volume of cement, if bulking of the sand is 15% is______.

**Options:
**

**Q6:-** Which of the following is TRUE regarding stress-strain curve of concrete?

**Options:
**

**Q7:-** Which one of the following is used as a carrier in paint?

**Options:
**

**Q8:-** Which of the following tests are used for testing of tiles?

**1.** breaking strength test

**2.** impact test

**3.** transverse strength test

**4.** water absorption test

**Options:
**

**Q9:-** How many bricks are required for 1 cubic meter of brick masonry work?

**Options:
**

**Q10:-** Which of the following mineral is responsible for the red colour in bricks?

**Options:
**

**Q11:-** What is the unit of measurement for steel reinforcement?

**Options:
**

**Q12:-** What is the weight (in kg) per meter length for 12 mm diameter steel bar?

**Options:
**

**Q13:-** What percentage of the total cost is added in the cost of construction for contingencies?

**Options:
**

**Q14:-** What percentage of total cost is added to the schedule of rates of the public work department for over-head cost?

**Options:
**

**Q15:-** For estimation of painting area of corrugated sheets, percentage increase in area above the plain area is______.

**Options:
**

**Q16:-** Central line method for estimation is suitable for________.

**Options:
**

**Q17:-** Deduction at the L-junction of wall for total length of the central line is______.

**Options:
**

**Q18:-** Calculate the quantity of the cement required in cubic meter for 10 square meters of cement plaster 12 mm thick using cement mortar of 1:6.

**Options:
**

**Q19:-** Calculate the quantity of the earthworks in cubic meter for a canal embankment of 100 m long having heights of 3 m and 5 m at the two extreme edges. Top widths of the embankment are 2 m and 4 m at the two extreme edges and side slope is 2: 1. Use trapezoidal method.

**Options:
**

**Q20:-** Calculate the primary estimate including contractor’s proﬁt in rupees for the building having a plinth area of 1,500 square meters and a rate of Rs. 2,000 per square meter.

**Options:
**

**Q21:-** 10 divisions of vernier scale are equal to 11 divisions of a main scale of each 0.1 mm. What is the least count of the vernier scale?

**Options:
**

**Q22:-** Which one of the following statements includes the principle of surveying?

**Options:
**

**Q23:-** Number of links in 20 m metric chain is______.

**Options:
**

**Q24:-** The hypotenuse allowance (in m) for 30 m long chain, if the slope is 1:10 is______.

**Options:
**

**Q25:-** What is the declination if magnetic meridian is towards the western side of the true meridian?

**Options:
**

**SSC Junior Engineer (JE) All Previous Papers (NewtonDesk.com)**

**Q26:-** Correction of length due to reduction to mean sea level is_______.

**Options:
**

**Q27:-** How much refraction correction (in m) is required for a distance of 500 m?

**Options:
**

**Q28:-** What is the purpose of conducting the resection method in the plan table surveying?

**Options:
**

**Q29:-** What is the degree of the curve (in degree) for a radius of 573 m using chain of 20 m length?

**Options:
**

**Q30:-** Which method of contouring is most suitable for hilly terrains?

**Options:
**

**Q31:-** The pore water pressure in the soil sample of consolidometer test is______.

**Options:
**

**Q32:-** The clay deposit of thickness 10 cm and void ratio 0.5 undergoes settlement and now it’s ﬁnal void ratio is 0.2. The thickness (cm) of the settlement layer is______.

**Options:
**

**Q33:-** Which of the following represent the percentage limit of porosity of the compacted sand?

**Options:
**

**Q34:-** In the falling head permeability test, in the duration of 3 hours the initial head of 1000 mm is dropped to 350 mm. The diameter of the stand pipe is 0.5 cm. The length and diameter of the soil specimen are 20 cm and 10 cm respectively. What is the coefﬁcient of permeability (mm/s) of the soil?

**Options:
**

**Q35:-** Which of the following is CORRECT to maximize the efﬁciency of all reaction turbines?

**Options:
**

**Q36:-** A 1.2 m wide rectangular channel of bed slop 0.0004 and manning’s coefficient 0.01, carrying the discharge of 0.5m^{3}/s. The normal depth of the channel is _______.

**Options:
**

**Q37:-** Which of the following statement is **CORRECT**?

**Options:
**

**Q38:-** Draft tube at the exit of a reaction turbine used for hydroelectric project is_____.

**Options:
**

**Q39:-** What is the depth of the center of pressure for the rectangular lamina which is vertically inside the water of height h?

**Options:
**

**Q40:-** In the hydel system, a forebay is used at the junction of______.

**Options:
**

**Q41:-** The motion of outgoing water from the hole made at midpoint of completely ﬁlled open cylindrical tank with water is______.

**Options:
**

**Q42:-** Which one is **CORRECT** about streamlined body?

**Options:
**

**Q43:-** What is the speciﬁc speed of a centrifugal pump, which has a rated capacity of 44 cumec and a head of 36 m when operated at the speed of 725 rpm?

**Options:
**

**Q44:-** On which of the following principle Bernoulli’s equation is based?

**Options:
**

**Q45:-** In an irrigated ﬁeld, the net irrigation requirement is 15 cm, the application efﬁciency is 80% and water conveyance efﬁciency is 60%. What is the gross irrigation requirement (in cm)?

**Options:
**

**Q46:-** Available moisture is the difference in water content of soil between ﬁeld capacity and________.

**Options:
**

**Q47:-** Right of way is the summation of the width of_______.

**Options:
**

**Q48:-** Gradient on a highway is 1 in 20. Radius of the curve is 200 m. After grade compensation the grade to be provided should not be less than 4%. Calculate the grade compensation.

**Options:
**

**Q49:-** Which one of the following is most important parameter for the removal of discrete particles in design of continuous ﬂow rectangular sedimentation tank?

**Options:
**

**Q50:-** The most efﬁcient method to conserve energy in the form of oil and gases is_______.

**Options:
**

**SSC Junior Engineer (JE) All Previous Papers (NewtonDesk.com)**

**Q51:-** Dead load comprises of:-

**Options:
**

**Q52:-** Which of the following statements is true?

**1.** Impact loads are equal to the sum of the magnitude of the loads actually caused and the magnitude of the loads had they been dead loads.

**2.** Impact loads are equal to the difference between the above mentioned entities.

**Options:
**

**Q53:-** What will be the value of reduction factor R1 if value of At is given to be 500ft^{2}?

**Options:
**

**Q54:-** If we use a link support in a structural system, then how many unknowns would we have?

**Options:
**

**Q55:-** Which of the following statements is true?

**1.** For instability, at least one joint of the structure should be able to displace without causing change in length of all the members.

**2. **For instability, at least one joint of the structure should be able to displace without causing change in length of at least one of the members.

**Options:
**

**Q56:-** If all the reactions acting on a planar system are concurrent in nature, then the system is:-

**Options:
**

**Q57:-** In the following questions, j represent no. of joints and r represents no. of external forces. If a structure has 2j – r no. of members, then it will be:-

**Options:
**

**Q58:-** What is the function of portal in bridge trusses?

**Options:
**

**Q59:-** Which of the following statements is true?

**1.** Simple trusses consist entirely of triangle.

**2.** It can consists of any other shaped intermediate parts, as long as it is stable.

**Options:
**

**Q60:-** Given that J is no. of joints. B and R are no. of members and no. of reactions. If B = 5, R = 3 and J = 4, then the truss is:-

**Options:
**

**Q61:-** Which of the following is most common alternative to cement in concrete?

**Options:
**

**Q62:-** is added to make white concrete.

**Options:
**

**Q63:-** Which process comes after batching in manufacture process of concrete?

**Options:
**

**Q64:-** In small works, concrete is transported using:

**Options:
**

**Q65:-** Steam curing of concrete is adopted for:

**Options:
**

**Q66:-** How does the strength of concrete differ with age of concrete?

**Options:
**

**Q67:-** Bleeding is good to an extent if it occurs when concrete is:

**Options:
**

**Q68:-** The figure given below represents a:

**Options:
**

**Q69:-** The size of commonly used specimen for compression test of concrete is:

**Options:
**

**Q70:-** is used to ensure that the thickness of plastering is uniform.

**Options:
**

**Q71:-** are used to press mortar and spread it uniformly.

**Options:
**

**Q72:-** The ratio of the allowable bond stress in deformed bars to that of plain bars is about:-

**Options:
**

**Q73:-** For which of the following grades ordinary concrete is not used?

**Options:
**

**Q74:-** The ratio of various ingredients (cement, sand, aggregates) in concrete of grade M 200 is: A. 1:2:4

**1.** 1:3:6

**2.** 1: 1.5: 3

**3. **1:1:2

**Options:
**

**Q75:-** What do we need to do while designing an air entrained concrete?

**Options:
**

**SSC Junior Engineer (JE) All Previous Papers (NewtonDesk.com)**

**Q76:-** If the effective plan area of a warehouse is 54 sq. m, and maximum height of piles permitted is 270 cm, then what is the number of cement bags that can be stored?

**Options:
**

**Q77:-** Which of the following is the results of proper batching of concrete?

**A.** Economy

**B.** Durability

**C.** Workability

**D.** Strength

**Options:
**

**Q78:-** The process of mixing, transporting, placing and compacting concrete using Ordinary Portland cement should not take more than how much time?

**Options:
**

**Q79:-** PSC stands for:

**Options:
**

**Q80:-** Which of the below structure doesn’t require Pre Stressed Concrete?

**Options:
**

**Q81:-** Which of the following is the minimum thickness of a ﬂat slab that is taken into consideration?

**Options:
**

**Q82:-** If W is the load on a circular slab of radius R, the maximum circumferential moment at the center of the slab is

**A)** WR^{2} / 16

**B)** 2WR^{2} / 16

**C)** 3WR^{2} / 16

**Options:
**

**Q83:-** The ratio of the breadth to effective depth of a beam is kept

**Options:
**

**Q84:-** A ribbed slab is provided for which of the following?

**Options:
**

**Q85:-** The thickness of the ﬂange of a Tee beam of a ribbed slab is assumed as

**Options:
**

**Q86:-** Which of the following statements is true?

**Options:
**

**Q87:-** According to I.S. 456-1978, the thickness of reinforced concrete footing on piles at its edges is kept less than

**Options:
**

**Q88:-** If **q** is the punching shear resistance per unit area **a**, is the side of a square footing for a column of side **b**, carrying a weight W including the weight of the footing, the depth (D) of the footing from punching shear consideration is

**A)** D = W(a-b) / 4a^{2}bq

**B)** D = W(a^{2}-b^{2}) / 4a^{2}bq

**C)** D = W(a^{2}-b^{2}) / 8a^{2}bq

**D)** D = W(a^{2}-b^{2}) / 4abq

**Options:
**

**Q89:-** The tangential component of stress on an plane inclined θ^{o} to the direction of the force, may be obtained by multiplying the normal stress by______.

**A)** Sin θ

**B)** Cos θ

**C)** tan θ

**D)** Sin^{2}θ

**Options:
**

**Q90:-** Shear strain energy theory for the failure of a material at elastic limit is due to

**Options:
**

**Q91:-** Pick up the indeterminate structure from those shown in the figure given below.

**Options:
**

**Q92:-** Beams composed of more than one material, rigidly connected together so as to behave as one piece, are known as

**Options:
**

**Q93:-** Poisson’s ratio is μ deﬁned as the ratio of

**Options:
**

**Q94:-** Among the following identify the dimensionless quantity.

**Options:
**

**Q95:-** Identify the correct statement.

**Options:
**

**Q96:-** For an isotropic, homogeneous and elastic material obeying Hook’s law, number of independent elastic constants is

**Options:
**

**Q97:-** The angle between the principle plane and the plane of maximum shear is

**Options:
**

**Q98:-** The state of pure shear stress is produced by

**Options:
**

**Q99:-** When the length of a tension member is too long

**Options:
**

**Q100:-** The allowable stress in axial tension is generally kept less if thickness of the member is more than

**Options:
**

**SSC Junior Engineer All Previous Papers**

The post SSC JE Previous Question Paper 2018 Shift 11 (Civil Engineering) appeared first on NewtonDesk.

]]>